hasanzhong的个人博客分享 http://blog.sciencenet.cn/u/hasanzhong


effect of electric boundary conditions on piezoelectric film

已有 3577 次阅读 2012-8-21 21:37 |个人分类:Paper|系统分类:论文交流| Films, piezoelectric

Ming Liu and Fuqian Yang, Finite element simulation of the effect of electric boundary conditions on the spherical indentation of transversely isotropic piezoelectric films, Smart Materials and Structures 21 (2012) 105020 (10pp)


Finite element simulation was used to analyze the effect of electric boundary conditions on the
indentation deformation of a transversely isotropic piezoelectric film with the contact radius
much larger than the film thickness. Six different combinations of electric boundary
conditions were used. The simulation results showed that the indentation load is proportional
to the square of the indentation depth and the indentation-induced electric potential at the
contact center is a linear function of the ratio of the indentation depth to the film thickness for
all six cases. The contact stiffness is proportional to the contact area and inversely proportional
to the film thickness. The nominal piezoelectric charge coefficient d33 is inversely proportional
to the derivative of the electric potential with respect to the indentation depth for the
indentation of a piezoelectric film by a conducting indenter with a grounded, rigid substrate.


上一篇:Finite Element of Delamination of Bi-Layer Structures
下一篇:Ming Liu's doctoral dissertation on contact deformation
收藏 IP: 128.163.152.*| 热度|


该博文允许注册用户评论 请点击登录 评论 (0 个评论)


Archiver|手机版|科学网 ( 京ICP备07017567号-12 )

GMT+8, 2023-3-22 07:17

Powered by ScienceNet.cn

Copyright © 2007- 中国科学报社