The International Journal of Advanced Manufacturing Technology November 2014 , Volume 75 , Issue 5-8, pp 1065-1076 DOI 10.1007/s00170-014-6191-y Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V Bing Wang, Zhanqia ...
International Journal of Mechanical Sciences 83 (2014) 172–183 Subdivision of chatter - free regions and optimalcutting parameters based on vibration frequencies for peripheral milling process Qinghua Song, Ganggang Ju,ZhanqiangLiu, Xing Ai Considering the self-excited and fo ...
Proc IMechE Part B: J Engineering Manufacture 2014, Vol. 228(2) 181–190 Serrated chipformation mechanism based on mixed mode of ductile fracture and adiabatic shear Bing Wang and Zhanqiang Liu Serrated chip is the frequent chip morphology duringhigh-speed machining of ...
Advances in Mechanical Engineering Volume 2014, Article ID 329564, 7 pages http://dx.doi.org/10.1155/2014/329564 Influence of Chatter on Machining Distortion for Thin-Walled Component Peripheral Milling Qinghua Song, Zhanqiang Liu, and Xing Ai In specific industrial appli ...
Applied Surface Science 292 (2014) 197– 203 Deformation phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy Jin Du, Zhanqiang Liu∗, Shaoyu Lv Ni-based superalloy represents a significant metal port ...
Int J Adv Manuf Technol (2014) 71:1159–1174 DOI 10.1007/s00170-013-5554-0 Chatter stability for micromilling processes with flat end mill Qinghua Song Zhanqiang Liu Zhenyu Shi A mechanistic model is developed to predict micromillingforces with flat end mill for both ...
Int J Adv Manuf Technol (2014) 71:1901–1908 DOI 10.1007/s00170-014-5633-x Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining Qibiao Yang Zhanqiang Liu Zhenyu Shi Bing Wang ...
Int J Adv Manuf Technol (2013) 68:187–196 DOI 10.1007/s00170-012-4718-7 Machining deformation prediction for frame components considering multifactor coupling effects Z. T. Tang T. Yu L. Q. Xu Zhanqiang. Liu Abstract : The machining deformationprediction model was developed ...
Materials at High Temperatures 30(2),2013:145-150 Dynamic behaviour of Ti-17 alloy under high strain rates at elevated temperatures Baolin Wang, Xing Ai, Zhanqiang Liu* and Jun Zhao ABSTRACT: The dynamic mechanical behaviour of Ti-17 alloy deformedat high strain rates ranging from 6,000 to ...
博文
视频
基金
相册
收藏
积分
会议