hasanzhong的个人博客分享 http://blog.sciencenet.cn/u/hasanzhong

博文

Nanodiamond powder compaction via laser shockwaves

已有 3378 次阅读 2013-1-30 05:41 |个人分类:Paper|系统分类:论文交流

Nanodiamond powder compaction via laser shockwaves: Experiments and finite element analysisAbstract

Laser shock sintering (LSS) is an innovative technique employing mechanical forces to densify powders. It can impart compressive stresses into material to improve the relative density and generate residual stresses to enhance the fatigue strength. In this work, LSS of nanodiamond powders embedded in polycrystalline cubic boron nitride (PCBN) substrate was experimentally investigated using a 1064 nm, 10 ns Q-switched Nd:YAG laser with a peak power density of 6.37 GW/cm2. Finite element simulation (FEM) was applied to predict the mechanical deformations induced by LSS. The dynamic analysis by ABAQUS/Explicit and static analysis by ABAQUS/Standard were performed in detail to predict the residual stress field and densification of nanodiamond powder compacts. The predicted densification of nanodiamond powder compacts are in agreement with the experimental data for single and multiple laser shocks.

http://www.sciencedirect.com/science/article/pii/S0032591013000612



https://blog.sciencenet.cn/blog-53626-657756.html

上一篇:Ming Liu's doctoral dissertation on contact deformation
下一篇:Effect of Crystal Orientation on Piezoelectric Response
收藏 IP: 46.193.160.*| 热度|

0

该博文允许注册用户评论 请点击登录 评论 (0 个评论)

数据加载中...

Archiver|手机版|科学网 ( 京ICP备07017567号-12 )

GMT+8, 2023-2-8 01:18

Powered by ScienceNet.cn

Copyright © 2007- 中国科学报社

返回顶部