博文
The effect of an electric current on the nanoindentation beh
|||
Guangfeng Zhao, Ming Liu and Fuqian Yang, The effect of an electric current on the nanoindentation behavior of tin, Acta Materialia 60 (2012) 3773-3782
Abstract
Electrical–thermal–mechanical interactions determine the reliability and performance of microelectromechanical devices and systems.
Using the nanoindentation technique the effect of an electric current on the indentation deformation of Sn strips was studied for an
indentation load in the range 50–200 lN. During the indentation an electric current density in the range 993.05–4087.89 A cm2
was
passed through the Sn strips, which introduced electrical–thermal–mechanical interactions. The experimental results showed that the
reduced contact modulus decreased with increasing electric current density. For an electric current density less than 4087.89 A cm2
the decrease in the reduced contact modulus with increasing electric current density was mainly controlled by Joule heating due to an
electrothermal interaction. The electrothermal interaction caused surface softening of the Sn strips. A simple relation is proposed to
describe the dependence of the reduced contact modulus on the electric current density. The indentation hardness decreased with increas-
ing indentation load, showing a normal indentation size effect. Using the relationship between indentation hardness and indentation
depth from strain gradient plasticity theory we curve fitted the experimental data and found that both the indentation hardness at
the limit of infinite depth and the characteristic length were dependent on the electric current density. Finite element analysis was per-
formed to analyze the indentation deformation of a two-dimensional tin strip under the simultaneous action of an electric current. The
simulation results showed that the contact modulus of tin decreased linearly with the square of the electric current density, qualitatively
in accordance with experimental observations for an electric current density 6 2803.7 A cm2
.
2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Keywords: Nanoindentation; Elastic behavior; Hardness
Electrical–thermal–mechanical interactions determine the reliability and performance of microelectromechanical devices and systems.
Using the nanoindentation technique the effect of an electric current on the indentation deformation of Sn strips was studied for an
indentation load in the range 50–200 lN. During the indentation an electric current density in the range 993.05–4087.89 A cm2
was
passed through the Sn strips, which introduced electrical–thermal–mechanical interactions. The experimental results showed that the
reduced contact modulus decreased with increasing electric current density. For an electric current density less than 4087.89 A cm2
the decrease in the reduced contact modulus with increasing electric current density was mainly controlled by Joule heating due to an
electrothermal interaction. The electrothermal interaction caused surface softening of the Sn strips. A simple relation is proposed to
describe the dependence of the reduced contact modulus on the electric current density. The indentation hardness decreased with increas-
ing indentation load, showing a normal indentation size effect. Using the relationship between indentation hardness and indentation
depth from strain gradient plasticity theory we curve fitted the experimental data and found that both the indentation hardness at
the limit of infinite depth and the characteristic length were dependent on the electric current density. Finite element analysis was per-
formed to analyze the indentation deformation of a two-dimensional tin strip under the simultaneous action of an electric current. The
simulation results showed that the contact modulus of tin decreased linearly with the square of the electric current density, qualitatively
in accordance with experimental observations for an electric current density 6 2803.7 A cm2
.
2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Keywords: Nanoindentation; Elastic behavior; Hardness
https://blog.sciencenet.cn/blog-53626-566421.html
上一篇：Finite-Element Analysis of Current-Induced Thermal Stress
下一篇：FEA of the spherical indentation of piezoelectric materials
