博文
[J-2011] Influence of cutting speed on surface integrity for
||
ORIGINAL ARTICLE
Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH95
Du Jin Zhanqiang Liu* Wan Yi Guosheng Su
Du Jin Zhanqiang Liu* Wan Yi Guosheng Su
[Abstract] Powder metallurgy (PM) nickel-based superalloy FGH95 has been widely used for components, which requires the greatest service performance. The surface integrity is becoming more and more important in order to satisfy the increasing service demands. However, the machined surface of FGH95 is easily damaged due to its poor machinability. The purpose of this paper is to investigate the effects of dry milling process parameters on the surface integrity of FGH95. Experiments were conducted on a CNC machining center under different cutting speeds. The machined surface is evaluated in terms of surface roughness, microhardness and white layer. Experiments results show milled surface integrity of FGH95 is sensitivity to the cutting speeds. The machined surface roughness decreases with increase of the cutting speed, but with further increase of cutting speed between 80 m/min to 100 m/min an increase in surface roughness appears. For microhardness, it can be seen that the machined workpiece surface hardens seriously. It can also draw the conclusion that cutting speed has the marginal effect on the white layer thickness generated in the machined subsurface.
Keywords Powder metallurgy . Machining .Microstructure . Metallography
Keywords Powder metallurgy . Machining .Microstructure . Metallography
https://blog.sciencenet.cn/blog-256695-420398.html
上一篇：[J2010-8] An experimental study on influences of material
下一篇：[J-2010]An Experimental and Numerical Analyses of Hard Turn
扫一扫，分享此博文
全部作者的其他最新博文
- • [J-2014] 镍基粉末高温合金切削加工表面白层形成热-力耦合作用
- • [J-2014] Investigations on the chip formation mechanism
- • 贺艾兴院士从教六十五周年《艾兴学术论文选集》-后记
- • [J-2014] Subdivision of chatter-free regions and optimal cut
- • [J-2014] Serrated chipformation mechanism based on mixed
- • [J-2014] Influence of Chatter on Machining Distortion
全部精选博文导读
相关博文
- • Does Consciousness Depend on Hallucination?(初学者版)
- • Relativity of Consciousness (初学者版)
- • Artificial Consciousness in Legal Applications (初学者版)
- • 2024-6-22回顾：Integrating the DIKWP Model into Hardware(初学者版）
- • Child-Safe Device Using the DIKWP Model(初学者版)
- • Purpose Driven 3-No problem-solving of DIKWP-TRIZ(初学者版)