博文
2021年波音公司的欧洲局专利状况——重点布局铁路、船舶和飞行器、成型加工作业、物理信号和控制技术
|
█武汉大学科教管理与评价研究中心 陈立新 张琳 黄颖
第三部分 2021年欧洲专利统计分析报告
29 世界主要机构在欧洲的专利布局
29.13 波音公司的欧洲局专利状况
2021年，波音公司（BOEING CO）获得欧洲局专利604项，比上一年增长了-20%，是获得欧洲局专利数量第13多的机构。可见欧洲是波音公司的主要市场。
相对来讲，波音公司在欧洲局的专利优势领域是：铁路、船舶和飞行器、成型加工作业、物理信号和控制、通信传输系统、物理测量。在这5个技术领域上，波音公司的专利份额相对较高，分别占欧洲局同领域专利数量的7.4%至0.9%。
从绝对数量上来看，波音公司在欧洲重点布局的技术领域是：铁路、船舶和飞行器、成型加工作业、物理信号和控制、一般机械和武器、物理测量。在这5个领域上其获得了数量较多的欧洲局专利，为171至35项。
可见，波音公司在欧洲的专利布局重点是铁路、船舶和飞行器技术。
表29.13-1 2021年波音公司主要技术领域的专利分布
技术领域 | 专利数量 | 占比（%） | |
1 | 铁路、船舶和飞行器 | 171 | 7.4% |
2 | 成型加工作业 | 151 | 1.8% |
3 | 物理信号和控制 | 50 | 1.7% |
4 | 通信传输系统 | 18 | 1.0% |
5 | 物理测量 | 35 | 0.9% |
6 | 图像处理 | 10 | 0.9% |
7 | 一般机械和武器 | 42 | 0.9% |
8 | 材料测试 | 26 | 0.9% |
9 | 电气元件和结构部件 | 33 | 0.8% |
10 | 数据传输控制协议 | 11 | 0.8% |
11 | 光电辐射测量与核物理 | 20 | 0.7% |
12 | 发动机和泵 | 32 | 0.6% |
13 | 半导体元件 | 9 | 0.6% |
14 | 电热与等离子体 | 5 | 0.6% |
15 | 计算机应用与软件工程 | 6 | 0.5% |
16 | 计算机安全 | 6 | 0.5% |
17 | 发电和输变电 | 17 | 0.4% |
18 | 计算机体系架构 | 2 | 0.4% |
19 | 数字信息传输 | 15 | 0.4% |
20 | 数据传输控制程序 | 3 | 0.4% |
注：占比（%）指其在某领域上的专利数量占该领域的比例。
图29.13-1 2021年波音公司在20个相对优势领域中的专利占比
致谢
感谢大连理工大学刘则渊教授、河南师范大学梁立明教授、科技部中国科学技术发展战略研究院武夷山研究员、大连理工大学丁堃教授、大连理工大学杨中楷教授对本报告的大力支持与帮助。同时，向以不同形式对本报告提出意见和建议的专家学者们表示诚挚的感谢。
如需要中美欧日韩五局及PCT专利数据、专利报告，以及咨询相关专利问题请添加微信号。
附表 2021年该机构欧洲授权专利
| TITLE | INVENTOR |
| LAYERED, TRANSPARENT THERMOPLASTIC FOR FLAMMABILITY RESISTANCE | JACKSON EUGENE A |
| COLOURED COATING AND FORMULATION COMPRISING AN INDICATOR FACILITATING DETERMINING THE COATING THICKNESS | OSBORNE JOSEPH H |
| HEAT AND RAIN EROSION RESISTANT COATING | KRIENKE KENNETH A |
| Method and apparatus for layup placement | BRENNAN JOSEPH D |
| ARBITRARILY SHAPED DEPLOYABLE MESH REFLECTORS | BASSILY SAMIR F |
| Curved composite frames and method of making the same | KEHRL DAVID J |
| STEERING RADIO FREQUENCY BEAMS USING NEGATIVE INDEX METAMATERIAL LENSES | LAM TAI ANH |
| Composite structures using interpenetrating polymer network adhesives | WEBER GARY ROBERT |
| SPECTRALLY SELECTIVE COATINGS AND ASSOCIATED METHODS FOR MINIMIZING THE EFFECTS OF LIGHTING STRIKES | LADD MICHAEL M |
| Distortional composite matrix | CHRISTENSEN STEPHEN |
| Method and device for forming joints in composite structures | HAND MICHAEL L |
| Repeater design and verification tool | ALMONTE SAMUEL |
| Compliant panel for aircraft | KOCH WILLIAM |
| Adjustment of wings for variable camber for optimum take-off and landing configuration | GOOD MARK |
| Aerial refuelling drogue deployment system | RICHARDSON FORREST EUGENE |
| Integrated backscatter X-ray system | SAFAI MORTEZA |
| Thick doped adhesive tape to enhance backscatter x-ray detectability | TOH CHIN H |
| Non-destructive inspection systems and methods that incorporate interchangeable probes | SARR DENNIS P |
| METHOD AND APPARATUS FOR CURING A COMPOSITE PART LAYUP | MATSEN MARC R |
| Vertical laminate noodly for high capacity pull-off for a composite stringer | MALMURUGAN KAMARAJ |
| Method and system for distributed network of nanoparticle ink based piezoelectric sensors for structural health monitoring | DUCE JEFFREY L |
| Method for manufacturing a section of a fuselage | BIORNSTAD ROBERT D |
| A method for real-time model based structural anomaly detection | SMITH TIMOTHY A |
| System and method for reducing the bulk density of metal powder | SLATTERY KEVIN THOMAS |
| Precise Absolute Time Transfer from a Satellite System | GUTT GREGORY M |
| WIRELESS DEVICE ASSOCIATION SYSTEM | CALLAHAN KEVIN S |
| Wing variable camber trailing edge tip | SANTINI GREGORY M |
| COMPOSITE STRUCTURES HAVING COMPOSITE-TO-METAL JOINTS AND METHOD FOR MAKING THE SAME | GRIESS KENNETH HARLAN |
| System and method for aligning a test article with a load | SILVA JOSE RAFAEL |
| Composite structure formed from glass fibre and a polymer | WILENSKI MARK S |
| NON-CONTACT SURFACE CHEMISTRY MEASUREMENT APPARATUS AND METHOD | VAHEY PAUL G |
| Composite structure and methods of assembling same | TSOTSIS THOMAS KARL |
| System and method for rapid management of logic formulas | FERTIG KENNETH W |
| SPOT BEAM BASED AUTHENTICATION OF A SATELLITE RECEIVER | GUTT GREGORY M |
| Systems and methods for signal selection and fault detection | FREEMAN ROBERT ERIK |
| Lightweight composite safety containment for flywheel energy storage | HULL JOHN R |
| X-ray backscatter system and method for detecting discrepancies in items | EDWARDS WILLIAM TALION |
| Nautical license identification system | KUCINOVIC PREDRAG |
| Method and apparatus for providing a communications pathway with high reliability | BRESHEARS BRIAN R |
| SANDWICHED FIBER COMPOSITES FOR BALLISTIC APPLICATIONS | WILENSKI MARK S |
| Component configuration system and methods of operating same | EDWARDS WILLIAM TALION |
| Ruggedised fibre coupled sensor package | CARRALERO MICHAEL A |
| Layered bonded structures formed from reactive bonding of zinc metal and zinc peroxide | WOO ROBYN L |
| Composite tubes for a fluid transport system | IRWIN JAMES PATRICK |
| AIRPORT SECURITY SYSTEM | SAMPIGETHAYA RADHAKRISHNA G |
| Ultrasound inspection system of limited access composite structures | GEORGESON GARY E |
| Joining composite fuselage sections along window belts | DOPKER BERNHARD |
| MODEL MANAGEMENT FOR COMPUTER AIDED DESIGN SYSTEMS | HERBSTREIT MICHAEL EDWARD |
| WLAN channel allocation | FARRICKER JAMES T |
| Bonded composite aircraft wing | DAN-JUMBO EUGENE |
| Systems and methods for dynamic control of task assignments in a fabrication process | PEDIGO SAMUEL F |
| Systems and methods for selection of loop filter bandwidth for carrier phase recovery | NOBAKHT RAMIN |
| Method and system for using fingerprints to track moving objects in video | MUNDHENK TERRELL NATHAN |
| Method and apparatus for compression of generalized sensor data | SCOTT JAMES P |
| Optical fiber coupled photonic crystal slab strain sensor, system and method of fabrication and use | CARRALERO MICHAEL A |
| System and method for testing a composite structure using a laser ultrasound testing system | BOSSI RICHARD H |
| Automated frame of reference calibration for augmented reality | DAVIES PAUL R |
| MOBILIZED SENSOR NETWORK FOR STRUCTURAL HEALTH MONITORING | JANG JUNG SOON |
| Methods and systems for determining an anchoring location of a marine vessel | KINDERMANN MERIAN |
| Hinged panel operation systems and methods | BEYER KEVIN W |
| Aerial forest inventory system | VIAN JOHN LYLE |
| Window shading assembly | DUNN BRANDON W |
| Hydroshock inspection system | SWEET WILLIAM J |
| System and method for collecting carbon dioxide utilizing dielectric heating | CROOKS TAB HUNTER |
| Method and systems for determining hydrogen embrittlement. | TRAN LUONG M |
| In-flight passenger information system | CURTIS VICKI ANN |
| Systems and methods for separating components of a multilayer stack of electronic components | WOO ROBYN L |
| Methods and systems for vehicle communication to a data network | LEE DONALD B |
| SECURE ROUTING BASED ON DEGREE OF TRUST | WHELAN DAVID |
| Apparatus and method for load testing a coupon | KISMARTON MAX U |
| Real-time feedback control for performing tooling operations in assembly processes | TOH CHIN H |
| Vehicle position validation | BALLOU PHILIP J |
| MODAL CORRECTOR MIRROR WITH COMPLIANT ACTUATION FOR OPTICAL ABERRATIONS | ROSSBACH DENNIS |
| Leak detection in composite structures | THOMAS CHARLES WILLIAM |
| Methods of making parts from at least one elemental metal powder | MATSEN MARC R |
| Methods and apparatus for passive thrust vectoring and plume deflection | WILLIE ROBERT H |
| Unstable imaging resonator | CATES MICHAEL C |
| SYSTEM AND METHOD FOR AIR-TO-GROUND DATA STREAMING | HOLSTEIN STEPHEN C |
| Structural inserts for honeycomb structures | HOLEMANS PETER |
| Integrated resource planning for satellite systems respecting all system constraints. | HA TUAN |
| Mapping a second coordinate system to a first coordinate system | DORSEY-PALMATEER JOHN WILLARD |
| System and method for operating a machine and performing quality assurance | ECKLEY DAVID J |
| Composite structures using interpenetrating polymer network adhesives | WEBER GARY ROBERT |
| PASSIVE LOAD ALLEVIATION FOR AERODYNAMIC LIFT STRUCTURES | KISMARTON MAX U |
| Methods and apparatus to determine integrity of composite structures | DAN-JUMBO EUGENE A |
| Uav take-off method and apparatus | CRIADO ALFREDO |
| Simultaneous nulling and beamfocusing from disparate antennas | WITTENBERG PETER S |
| SHAPE-DISTORTING TOOLING SYSTEM AND METHOD FOR CURING COMPOSITE PARTS | LOFTUS ROBERT T |
| SPACE BASED AUTHENTICATION UTILIZING SIGNALS FROM LOW AND MEDIUM EARTH ORBIT | ENGE PER |
| System and method for testing compression panels | GRIESS KENNETH H |
| Lightning protected radome system | LORE MICHAEL M |
| Repair apparatus and method for composite panels having a conductive layer | ACKERMAN PATRICE K |
| SYSTEMS AND METHODS FOR CONVERTING WIND FROM AN AIRCRAFT INTO ELECTRICAL POWER | HOFFSTADT BRETT MUKHERJEE |
| CONTEXT AWARE NETWORK SECURITY MONITORING FOR THREAT DETECTION | AYYAGARI ARUN |
| WING TIP DEVICE FOR AN AIRCRAFT WING | ZAMAN ABUMUHAMMED A |
| JOINING COMPOSITE COMPONENTS USING LOW TEMPERATURE THERMOPLASTIC FILM FUSION | WONG SHARON |
| SYSTEM AND METHODS FOR REDUCING GNSS RECEIVER POWER USAGE BY LEVERAGING SIGNALS OF OPPORTUNITY TO PREDICT GNSS AVAILABILITY | WHELAN DAVID A |
| System and method for positioning an automated assembly tool relative to a structure | REID ERIC M |
| Flexible manufacturing system for aircraft structures | DAY DAN DRESSKELL |
| METHOD OF FABRICATING A CURVED COMPOSITE STRUCTURE USING COMPOSITE PREPREG TAPE | SMITH DANIEL RICHARD |
| NOISE SOURCE DECOMPOSITION SYSTEM AND METHOD USING AN ADAPTABLE APERTURE PHASED ARRAY | UNDERBRINK JAMES ROBERT |
| THRUST REVERSER TORQUE BOX WITH DISCRETE MAJOR FITTINGS | STOKES JR RICHARD |
| SYSTEMS AND METHODS FOR DEFINING A SURFACE CONTOUR OF A LAYERED CHARGE OF MATERIAL | COXON BRAD ANDREW |
| SYSTEMS AND METHODS FOR DISPENSING A SUBSTANCE ON A SURFACE | DAVANCENS ANGELICA |
| ENHANCED HYBRID-TEE COUPLER | TATOMIR PAUL J |
| ANTENNA ARRAY OPTIMIZATION SYSTEM | ALLEN DAVID L |
| FLIGHT TEST EQUIPMENT INSTALLATION SYSTEM AND METHOD | BROWN LUKE |
| Dual-interface coupler | OBEROI HARINDER S |
| Metrology-based system for operating a flexible manufacturing system | OBEROI HARINDER S |
| Wheel mounting system | OBEROI HARINDER S |
| Towers for accessing an interior of a fuselage assembly | OBEROI HARINDER S |
| SYSTEMS AND METHODS OF AIRPORT TRAFFIC CONTROL | ZIMMER NICO |
| FAN NOZZLE WITH THRUST REVERSING AND VARIABLE AREA FUNCTION | CERRA DAVID F |
| SYSTEMS AND METHODS FOR DETECTING CRACK GROWTH | HANDLER JORDAN JEROME |
| SHOP ORDER STATUS VISUALIZATION SYSTEM | SENESAC CHRISTOPHER J |
| ACTIVE THERMAL MANAGEMENT AND THERMAL RUNAWAY PREVENTION FOR HIGH ENERGY DENSITY LITHIUM ION BATTERY PACKS | KROLAK MATTHEW J |
| VARIABLE MAXIMUM COMMANDABLE ROLL RATE FOR DIRECTIONAL CONTROL DURING ENGINE-OUT ROLLING MANEUVER | SHAPIRO DANIEL R |
| THERMAL SPRAY FOR DURABLE AND LAGE-AREA HYDROPHOBIC AND SUPERHYDROPHOBIC/ICEPHOBIC COATINGS | NEWBLOOM GREGORY M |
| PLACEMENT OF MODIFIER MATERIAL IN RESIN-RICH POCKETS TO MITIGATE MICROCRACKING IN A COMPOSITE STRUCTURE | WILENSKI MARK S |
| Method for creating and choosing a determinate piloting strategy for an aircraft | LOPEZ LEONES JAVIER |
| FIRE-RETARDING APPARATUS AND METHODS OF THEIR MANUFACTURE | HARIRAM SHAM S |
| EVENT DETECTION SYSTEM | AUSTIN THOMAS ROBERT |
| POSITION-LOCKING FOR A WATERCRAFT USING AN AUXILIARY WATER VESSEL | SOOHOO KIE L |
| LOW STRESS STIFFENER RUNOUT IN PI BONDED STRUCTURE | JANSEN JAN T |
| METHODS AND APPARATUSES FOR MITIGATING TIN WHISKER GROWTH ON TIN AND TIN-PLATED SURFACES BY DOPING TIN WITH GERMANIUM | WOODROW THOMAS A |
| QUADRANT CHANGE CONTROL IN BRUSHLESS DC MOTORS | CAMERON DOUGLAS C |
| RUGGEDIZED SMALL FORM FACTOR OPTICAL SUB-ASSEMBLY (OSA) AND DATA BUS-IN-A-BOX (BIB) | CHAN ERIC Y |
| Systems and methods for compacting a charge of composite material | ROBINS BRIAN GREGORY |
| LOCATING LUGGAGE WITH RFID TAGS | PUENTES ANTONIO F |
| STIFFENED COMPOSITE PANELS AND METHOD OF THEIR MANUFACTURE | ROSS JOSHUA AMORY |
| AIRCRAFT TURNS FOR INTERVAL MANAGENT | SCHARL JULIEN EMILE SEBASTIEN |
| SWITCHABLE TRANSMIT AND RECEIVE PHASED ARRAY ANTENNA | CHEN MING |
| SPECTRAL BALANCING TECHNIQUE | JUNGWIRTH DOUGLAS R |
| METHODS FOR RECOVERING WASTE ENERGY FROM BLEED AIR DUCTS | MITCHELL BRADLEY J |
| SYSTEM AND METHOD OF FORMING A COMPONENT USING A MANDREL ASSEMBLY | MCMILLAN DANIEL JAMES |
| INTEGRATED HIGH THERMAL CONDUCTIVE FIBER AS COOLING FIN FOR SMA ACTUATOR WITH EXPANDABLE SLEEVE | APDALHALIEM SAHRUDINE |
| MOBILE COMMUNICATION DEVICE AND METHOD OF OPERATING THEREOF | STERN ALLON J |
| ISOTROPIC FEATURE MATCHING | WEISMULLER THOMAS PAUL |
| DUAL WALLED TITANIUM TUBING AND METHODS OF MANUFACTURING THE TUBING | RUST CHARLES WILLIAM |
| DYNAMIC ACTIVATION OF PUMPS OF A FLUID POWER SYSTEM | WILSON THOMAS M |
| STRUCTURAL BOND INSPECTION | STEWART ALAN F |
| MULTI-FUNCTION SHARED APERTURE ARRAY | PITTS MARTY ALLEN |
| VARIABLE-CAPTURE SUPERSONIC INLET | HUYNH THUY |
| SECTION DIVIDER ASSEMBLY FOR A VEHICLE | WALTON BRENT CLARENCE |
| TWO-DIMENSIONALLY ELECTRONICALLY-STEERABLE ARTIFICIAL IMPEDANCE SURFACE ANTENNA | PATEL AMIT M |
| COUPLED FIBERS IN COMPOSITE ARTICLES | KOZAR MICHAEL P |
| A TEXTURED LEADING EDGE FOR AEROSPACE AND NAUTICAL STRUCTURES | PAESANO ANTONIO |
| ENVIRONMENTALLY FRIENDLY ALUMINUM COATINGS AS SACRIFICIAL COATINGS FOR HIGH STRENGTH STEEL ALLOYS | IZAGIRRE ETXEBERRIA USOA |
| SENSING OF A MAGNETIC TARGET | FAVILLA STEPHAN JOEL |
| MANDREL CONFIGURATION MONITORING SYSTEM | CLARK DON M |
| AIRCRAFT INTERIOR MONITORING | KUMAR ANIL |
| PLANETARY GEAR SYSTEM AND CARRIER THEREFOR | BOUWER SCOTT HENDRIK |
| PRE-STRAINED COMPOSTIE TEST COUPONS | ESPOSITO JACK J |
| GUST COMPENSATION SYSTEM AND METHOD FOR AIRCRAFT | ABDEL-MOTAGALY KHALED |
| LIQUID CRYSTAL FILLED ANTENNA ASSEMBLY, SYSTEM, AND METHOD | WILLIAMS JOHN D |
| MANAGEMENT OF A DISPLAY OF AN ASSEMBLY MODEL | SENESAC CHRISTOPHER J |
| NOVEL FIRE RETARDANT COMPOUNDS | GREGERSEN KIMBERLY-ALICE D |
| SYSTEM AND METHOD TO PREDICT WHETHER A PROTECTION CIRCUIT IS LIKELY TO PREVENT A LATENT FAILURE WITHIN A MONITORED CIRCUIT | CHESNUT KAY |
| SYSTEMS AND METHODS FOR GROUND COLLISION AVOIDANCE | BAER JOSHUA J |
| METHOD AND DEVICE FOR PERFORMING AUTOMATED OPERATIONS ON A WORKPIECE | SKAGGS KIRK DOUGLAS |
| METHOD AND APPARATUS FOR APPLYING A STRIP OF MATERIAL OVER AN EDGE ON A STRUCTURE | MILLER II RICHARD ALLEN |
| SOUND ATTENUATION APPARATUS AND METHOD | NESBITT ERIC H |
| SYSTEM FOR ADDITIVELY MANUFACTURING COMPOSITE PARTS | EVANS NICK S |
| COMPOSITE JOINT OPTIMIZATION | KHOSRAVANI SHAHRIAR |
| SYSTEM AND METHOD FOR SELECTING A COMMUNICATION NETWORK IN A SENSOR NETWORK | PEI GUANGYU |
| STRUCTURAL ARRANGEMENT AND METHOD OF FABRICATING A COMPOSITE TRAILING EDGE CONTROL SURFACE | REUSCH DAVID C |
| AIRCRAFT HYDRAULIC THERMAL MANAGEMENT SYSTEM | LIAO JIANMIN |
| TANKER AIRCRAFT CAPACITY EXTENSION SYSTEM AND METHOD | PERRY STEVEN R |
| SYSTEMS AND METHODS OF ANALOG BEAMFORMING FOR DIRECT RADIATING PHASED ARRAY ANTENNAS | JESIOLOWSKI JEFFREY MATTHEW |
| OPTICAL SCANNER AND PROJECTION APPARATUS FOR THERMAL MANAGEMENT OF COMPOSITE REPAIRS AND METHOD OF THERMAL MANAGEMENT | SPALDING JOHN F |
| MOLD, SYSTEMS AND METHODS FOR INJECTION MOLDING A SEALANT TO AN OBJECT | ERICKSON CHRIS J |
| ULTRASONIC INSPECTION USING FLEXIBLE TWO-DIMENSIONAL ARRAY APPLIED ON SURFACE OF ARTICLE | HOLMES TYLER M |
| AIRCRAFT STALL PROTECTION SYSTEM | LEOPOLD DAVID DANIEL |
| ADDITIVE MANUFACURING SYSTEMS AND METHODS FOR MAGNETIC MATERIALS | WILLIAMS JOHN D |
| BROADBAND BLADE ANTENNA DEFINING A KITE-SHAPED OUTER PROFILE | DOYLE JOSEPH A |
| FRICTION WELDING SYSTEM | CARTER MATTHEW DOUGLAS |
| AIRCRAFT DISTRESS TRACKING AND INTERFACE TO SEARCH AND RESCUE SYSTEM | MURPHY TIMOTHY ALLEN |
| INTEGRATED OPTICAL BORESIGHTING TARGET | KORESKO CHRISTOPHER D |
| COMPOSITE MATERIAL PLACEMENT METHOD | JOHNSON BRICE A |
| EMBEDDED DIELECTRIC STRUCTURES FOR ACTIVE FLOW CONTROL PLASMA SOURCES | NIKIC DEJAN |
| SANDWICH PANEL JOINTS AND METHODS FOR JOINING SANDWICH PANELS | ENGQUIST BRYAN S |
| TRAILING EDGE CORE COMPARTMENT VENT FOR AN AIRCRAFT ENGINE | WILLIE ROBERT H |
| CYBER SECURITY SYSTEM WITH DIFFERENTIATED CAPACITY TO DEAL WITH COMPLEX CYBER ATTACKS | MEAD JADRANKA |
| SYSTEM AND METHOD FOR VERIFYING ADS-B MESSAGES | TABOSO BALLESTEROS PEDRO |
| SCRAMBLED COUNTER MODE FOR DIFFERENTIAL POWER ANALYSIS RESISTANT ENCRYPTION | HARS LASZLO |
| DATA DEPENDENT AUTHENTICATION KEYS FOR DIFFERENTIAL POWER ANALYSIS RESISTANT AUTHENTICATION | HARS LASZLO |
| SCRAMBLED TWEAK MODE OF BLOCK CIPHERS FOR DIFFERENTIAL POWER ANALYSIS RESISTANT ENCRYPTION | HARS LASZLO |
| SURFACE CARD ANTENNA APPARATUS | MENTESANA NICHOLAS B |
| SYSTEM AND METHOD FOR ENVIRONMENTAL CONTROL SYSTEM DIAGNOSIS AND PROGNOSIS | NICKS ERIC L |
| RAPID CURING THIOL EPOXY RESIN WITH IMPROVED COMPRESSION STRENGTH PERFORMANCE | NOWAK ANDREW P |
| MULTI-STEP DRILLING APPARATUS AND METHODS UTILIZING AIR FLOW SENSING CONTROL | HOLLEMAN WESLEY EDWARD |
| ADHESIVE COMPOSITIONS AND METHODS FOR THEIR USE AND PREPARATION | GROSS ADAM FRANKLIN |
| DEVICE AND METHOD FOR CUTTING A CONTINUOUS FIBER REINFORCED MATERIAL | WALDROP III JOHN C |
| SELF-LOCATING ROBOTS | SZARSKI MARTIN ALEXANDER |
| COORDINATED COMPOSITE TAPE LAYING | CROTHERS PHILLIP JOHN |
| SYSTEM AND METHODS FOR CONVEYING PASSENGERS, FLIGHT CREW PERSONNEL, CONTAINERS AND FOOD SERVICE CARTS | BROWN DOUGLAS A |
| EDDY CURRENT PROBE ROTATOR | BANGSUND JOHN |
| STRUCTURAL ANTENNA ARRAY AND METHOD FOR MAKING THE SAME | URCIA MANNY S |
| CUTTER BLADES FOR AUTOMATED FIBER PLACEMENT MACHINES | MODIN ANDREW ELMER |
| PASS-THROUGH BULKHEAD SEAL FITTING | LOGAN CHAZZ A |
| APPARATUS AND METHOD OF FORMING A COMPOSITE STRUCTURE | SUNDQUIST DAVID JOHN |
| LINEAR ACTUATOR SYSTEM WITH CIRCUMFERENTIALLY AND AXIALLY ADJUSTABLE END STOP ASSEMBLY | UNGAR LIOR |
| SYSTEM AND METHODS FOR RESPONDING TO CYBERSECURITY THREATS | GRUBEL BRIAN CHRISTOPHER |
| SYSTEMS AND METHODS FOR FORMING A VENT ALONG AN ANGLE THROUGH A MATERIAL | COFFMAN MATTHEW A |
| OPTICAL MONITORING SYSTEM AND METHOD FOR IMAGING A COMPONENT UNDER TEST | GROSSNICKLE JAMES A |
| METHODS FOR LOCALIZATION USING GEOTAGGED PHOTOGRAPHS AND THREE-DIMENSIONAL VISUALIZATION | TROY JAMES J |
| DIFFUSION-BONDED METALLIC MATERIALS | CHOU KATHLEEN |
| INTEGRATED SMART SUSCEPTOR HEATER BLANKET DEBULK SYSTEM FOR COMPOSITES | HOPKINS ANDREW M |
| METHODS OF REPAIRING AN ACOUSTIC SANDWICH PANEL AND ACOUSTIC SANDWICH PANEL REPAIR KITS THEREFOR | PIERCE EVAN F |
| ENGINE ACCESSORY DRIVES SYSTEMS AND METHODS | ROACH JEFFREY M |
| DYNAMIC FORMING TOOLS FOR COMPOSITE PARTS | KNUTSON SAMUEL JAMES |
| SYSTEMS AND METHODS FOR VISCOUS MATERIAL VACUUM DEAERATION, AND SYSTEMS AND METHODS FOR DEPOSITING COMPOUNDS IN A STRUCTURE | FLEMING MICHAEL JOHN |
| LIMITED ACCESS FASTENER INSTALLATION | OBEROI HARINDER S |
| UTILITY FIXTURE FOR CREATING A DISTRIBUTED UTILITY NETWORK | OBEROI HARINDER S |
| CHARGE SHAPING METHOD AND APPARATUS | CHAPMAN MICHAEL R |
| DEPLOYABLE CLEARANCE PANEL SYSTEM, METHOD, AND ASSEMBLY FOR A MONUMENT WITHIN AN INTERNAL CABIN OF AN AIRCRAFT | MCINTOSH DARREN CARL |
| SYSTEM AND METHOD FOR PROTECTING THE STRUCTURAL INTEGRITY OF AN ENGINE STRUT | WRIGHT ROBERT S |
| DAMAGE TOLERANT AND FAIL-SAFE (DTFS) HIGH STRENGTH PRELOADED PIN ASSEMBLY | BERGESON BLAKE J |
| UNMANNED AERIAL VEHICLE FLIGHT CONTROL SYSTEM | RANGARAJAN MURALI |
| HIGH-CAPACITY COMMUNICATIONS SATELLITE USING PASSIVE OPTICAL BEAMFORMING | NEUMAN MICHAEL |
| THRUST RECOVERY OUTFLOW VALVES FOR USE WITH AIRCRAFT | TRETOW PAUL R |
| SYSTEMS AND METHODS FOR SATELLITE ORBIT AND MOMENTUM CONTROL | HO YIU-HUNG MONTE |
| THREADED ADJUSTABLE-HEIGHT INSERTS AND RELATED METHODS | LOPEZ KARINA R |
| STRUCTURE HAVING JOINED UNITARY STRUCTURES | LUDIN DOUGLAS REINHARD |
| TELESCOPING CAP ASSEMBLY FOR ENCAPSULATING A FASTENER DISPOSED WITHIN A CONFINED SPACE | ASTON RICHARD W |
| TRIVALENT CHROMIUM PLATING FORMULATIONS AND PROCESSES | IJERI VIJAYKUMAR S |
| PERSONAL GLOBAL POSITIONING SYSTEM (GPS) SECURITY TOKEN | GLATFELTER JOHN WILLIAM |
| SEMICONDUCTOR MICRO-HOLLOW CATHODE DISCHARGE DEVICE FOR PLASMA JET GENERATION | NIKIC DEJAN |
| SYSTEM AND METHOD FOR OPERATIONAL PHASE DETECTION | WANG CHANGZHOU |
| METHOD FOR POLISHING END FACES OF PLASTIC OPTICAL FIBER | KOSHINZ DENNIS G |
| SYSTEM AND METHODS FOR DETERMINING CHANNEL CHARACTERISTICS | EVERETT MATTHEW M |
| AIR PURIFICATION SYSTEM AND METHOD OF ASSEMBLING | BREIGENZER THOMAS JAMES |
| LOAD CONTROLLING BOLTED FLANGE DEFORMABLE SPACERS | STANESCU ADRIAN |
| SEAL ASSEMBLY FOR SEALING RELATIVELY MOVABLE COMPONENTS | SOMAN CHARUHAS M |
| SYSTEM AND METHOD FOR GROUND VIBRATION TESTING AND WEIGHT AND BALANCE MEASUREMENT | MILLER MARK E |
| HYPERSPECTRAL BORESCOPE SYSTEM | MOTZER WILLIAM P |
| POWER ADJUSTMENT FOR CODE SIGNALS | HO ANTONY |
| PHOTONIC CRYSTALS LOGIC DEVICES | CARRALERO MICHAEL A |
| CERAMIC DIE INCLUDING A PLURALITY OF PREFERENTIALLY LOCATED FIBERS AND ASSOCIATED METHOD OF CONSTRUCTING A CERAMIC DIE | SIEVERS DANIEL E |
| SYSTEM AND METHOD FOR SENSING ENVIRONMENTAL CONDITIONS AND ALERTING A USER IN RESPONSE | GLATFELTER JOHN W |
| PARTICULATE PREPREG FORMING AID | POLUS JEFFREY E |
| FLUID-TIGHT MECHANICAL FASTENING SYSTEM AND ASSOCIATED STRUCTURAL ASSEMBLY | WALKER STEVEN P |
| HYDROGEN FUEL CELL STACK AND METHOD FOR UPGRADING A HYDROGEN FUEL CELL STACK | BLANCO JOSé ANTONIO |
| FINITE ELEMENT MODELING AND ANALYSIS OF CRACK PROPAGATION IN MULTIPLE PLANES OF A STRUCTURE | MABSON GERALD E |
| METHOD AND SYSTEM FOR RESIN INFUSING A COMPOSITE PREFORM | ROBERTS RICHARD WILLIAM |
| FRICTION STIR WELDED WINGTIP TORQUE BOX | SHEMKUNAS MICHAEL P |
| APPLICATION OF FACTORY AUTOMATION FOR AN AIRLINE ASSEMBLY AND BUILD PROCESS | AYYAGARI ARUN |
| SLIDING JOINT KITS, SYSTEMS CONTAINING THE SAME, AND RELATED METHODS | CONNELLY THOMAS JOSEPH |
| METAL-MODIFIED, PLASMA-TREATED THERMOPLASTICS FOR IMPROVED ELECTRICAL PERFORMANCE | TSOTSIS THOMAS K |
| MICROWIRE ARRAY DEVICES AND METHODS FOR FABRICATING POLYMERIC SHEETS CONTAINING MICROWIRES | VAJO JOHN J |
| FORCE RESPONSIVE PRE-IMPREGNATED COMPOSITE METHODS, SYSTEMS AND APPARATUSES | SHAW PAUL D |
| SYSTEM AND METHOD FOR HIGH SPEED SURFACE AND SUBSURFACE FOREIGN OBJECT DEBRIS AND DEFECT DETECTION | THOMPSON JEFFREY G |
| PROVIDING SECURE DATA CONNECTIONS IN AN AVIATION ENVIRONMENT | MITCHELL TIMOTHY |
| METHOD AND APPLICATOR FOR APPLYING SEALANT TO FASTENERS | LARRABEE DIANA DUJUNCO DAN |
| AIRCRAFT COMPOSITE WINGBOX INTEGRATION | KISMARTON MAX U |
| PLANKED STRINGERS THAT PROVIDE STRUCTURAL SUPPORT FOR AN AIRCRAFT WING | KISMARTON MAX U |
| WING AND METHOD OF MANUFACTURING A WING | WILKERSON JEFFREY A |
| STRUCTURALLY EMBEDDED LIGHTING FOR DISPLAY PANELS | KULKARNI ABHISHEK PRADEEP |
| DYNAMIC, PERSISTENT TRACKING OF MULTIPLE FIELD ELEMENTS | GUTHRIE RICHARD BERNARD |
| METHOD OF LOCALLY INFLUENCING RESIN PERMEABILITY OF A DRY PREFORM | MEURE SAM |
| METHOD AND APPARATUS TO CONTROL THRUST RAMPING OF AN AIRCRAFT ENGINE | JACKOWSKI JASON J |
| BLOCKER DOOR ASSEMBLY HAVING A THERMOPLASTIC BLOCKER DOOR FOR USE IN A TURBINE ENGINE | GAW KEVIN O'BRIEN |
| AIRCRAFT PILOT DISPLAY SYSTEM AND METHOD OF USE | SCHWARTZ SAMANTHA |
| ACTUATOR ASSEMBLIES, MECHANICAL ASSEMBLIES INCLUDING THE ACTUATOR ASSEMBLIES, AND METHODS OF FABRICATING THE SAME | CLINGMAN DANIEL JOHN |
| BROADBAND STACKED MULTI-SPIRAL ANTENNA ARRAY INTEGRATED INTO AN AIRCRAFT STRUCTURAL ELEMENT | LAVIN RONALD O'NEIL |
| EXPULSION OF A FIRE SUPPRESSANT FROM A CONTAINER | WRIGHT ROBERT S |
| SYSTEMS AND METHODS FOR ADDING FUNCTIONAL GRID ELEMENTS TO STOCHASTIC SPARSE TREE GRIDS FOR SPATIAL FILTERING | RAY GARY ALAN |
| SYSTEMS AND METHODS FOR PULSE DESCRIPTOR WORD GENERATION USING BLIND SOURCE SEPARATION | RAY GARY ALAN |
| AIRCRAFT INCLUDING LAVATORY WITH HAND DRYER HAVING MANAGED AIR FLOW | SATERMO ERIC K |
| ACTUATABLE FLOW MEDIA | NESBIT ASHLEIGH RAOUL |
| SOLAR CELL ARRAY CONNECTIONS USING CORNER CONDUCTORS | REHDER ERIC |
| METHODS, SYSTEMS AND APPARATUSES FOR IN SITU REMOVAL OF WINDOW DISTORTION | STERLING TYLER R |
| AIRCRAFT LANDING GEAR, AIRCRAFT, AND RELATED METHODS | COTTET JUSTIN DUANE |
| APPARATUS AND METHOD OF COMPENSATING FOR RELATIVE MOTION OF AT LEAST TWO AIRCRAFT-MOUNTED CAMERAS | ARMATORIO ANDY |
| COMMUNICATION SYSTEMS AND METHODS | GLATFELTER JOHN WILLIAM |
| METHOD OF JOINING FIRST AND SECOND MEMBERS THROUGH FRICTION STIR WELDING METHOD AND CORRESPONDING ASSEMBLY | LITWINSKI RICHARD A |
| AIRFOIL-SHAPED BODY HAVING COMPOSITE BASE SKIN WITH INTEGRAL HAT-SHAPED SPAR | SHEPPARD ANDREW |
| FABRICATION OF CERAMIC MATRIX COMPOSITES WITH CARBON NANOTUBES AND GRAPHENE | BRALEY DANIEL JOSEPH |
| APPARATUSES AND METHODS FOR ACOUSTICALLY EXCITING A FACE PANEL OF A STOWAGE BIN INSIDE A VEHICLE | IBRAHIM YAKENTIM |
| METHODS AND DEVICES FOR LIGHT DISTRIBUTION IN AN AIRCRAFT, AND AIRCRAFT INCLUDING SUCH DEVICES | HILLS KAREN L |
| AIRCRAFT MONITORING SYSTEM | GRIFFITHS ROBERT C |
| A COMPUTER-IMPLEMENTED METHOD AND A SYSTEM FOR GUIDING A VEHICLE WITHIN A SCENARIO WITH OBSTACLES | VALLS HERNANDEZ ERNESTO |
| SIMPLIFICATION OF COMPLEX WAVEGUIDE NETWORKS | ALVAREZ DANIEL A |
| MULTIPLE ELECTROMECHANICAL ACTUATOR CONTROL SYSTEM | PECK JAMES L JR |
| SURFACE BASED HOLE TARGET FOR USE WITH SYSTEMS AND METHODS FOR DETERMINING A POSITION AND A VECTOR OF A HOLE FORMED IN A WORKPIECE | DESJARDIEN MATTHEW |
| SYSTEM AND METHOD FOR CRUISE MONITORING AND ALERTING | CORNELL BRADLEY D |
| LIGHTNING STRIKE INCONSISTENCY AIRCRAFT DISPATCH MOBILE DISPOSITION TOOL | SWEERS GREGORY JAMES |
| WIRE CONTACT INSPECTION | RAY GARY A |
| SYSTEM AND METHOD FOR INCREASING THE EFFICIENCY OF HEATING A CRYOGENIC FLUID FLOWING THROUGH A CONDUIT | SWENSON KEVIN |
| METHOD AND SYSTEM FOR IDENTIFYING WIRE CONTACT INSERTION HOLES OF A CONNECTOR | HOFFMANN HEIKO |
| SYSTEMS AND METHODS FOR ADDITIVE MANUFACTURING | WILENSKI MARK STEWART |
| TOOLING WITH PERMANENT LOW FRICTION COATING FOR SETTING INTERFERENCE-FIT FASTENERS | HAWORTH PAUL MICHAEL |
| FLIGHT RANGE-RESTRICTING SYSTEMS AND METHODS FOR UNMANNED AERIAL VEHICLES | CLARK JASON W |
| FIBER-MODIFIED INTERLAYER FOR A COMPOSITE STRUCTURE AND METHOD OF MANUFACTURE | TSOTSIS THOMAS K |
| SUPPORT STRUCTURE FOR A SURFACE TREATMENT ASSEMBLY AND METHOD | VASA DHANANJAY B |
| AUTOMATED WIRE PROCESSING SYSTEM AND METHODS | PORTER JOHN |
| AUTHENTICATING AN AIRCRAFT DATA EXCHANGE USING DETECTED DIFFERENCES OF ONBOARD ELECTRONICS | LAWSON JACK |
| CONDUCTIVE FASTENING SYSTEM FOR COMPOSITE STRUCTURES | KHOSRAVANI SHAHRIAR |
| TEST FIXTURE FOR TENSIONING AND COOLING AN ARTICLE | ANDERSON DAVID MITCHELL |
| METHOD AND APPARATUS FOR MULTIPLE RAW SENSOR IMAGE ENHANCEMENT THROUGH GEOREGISTRATION | PHILLIPS DANIEL T |
| A METHOD FOR A CURING CYCLE OF AN INORGANIC THERMOSET RESIN | GONZALEZ GARCIA ANA |
| SYSTEMS AND METHODS FOR CONTROLLING MOISTURE INGRESS IN AIRCRAFT SKIN MOUNTED ELECTRONICS | PETERSEN ROBERT M |
| HEAT PIPE WITH NON-UNIFORM CROSS-SECTION | DROLEN BRUCE LEE |
| DETERMINATION OF FLIGHT PATH FOR UNMANNED AIRCRAFT IN EVENT OF IN-FLIGHT CONTINGENCY | TILLOTSON BRIAN J |
| ADJUSTABLE CANTILEVERED PAINT APPARATUS ACTUATION SYSTEM | HALAMANDARIS GEORGE P |
| CONTROLLED FIBER-MATRIX ADHESION FOR POLYMER FIBER COMPOSITES | WILENSKI MARK S |
| WIDEBAND BEAM BROADENING FOR PHASED ARRAY ANTENNA SYSTEMS | SHAPOURY ALIREZA |
| COMPOUND SHIMMING | NESBIT ASHLEIGH |
| FASTENER-INSTALLATION SYSTEMS AND METHODS | HELMICK EERIK J |
| HYBRID MAC PROTOCOL, BASED ON CONTENTION AND RESERVATION, FOR MOBILE AD HOC NETWORKS WITH MULTIPLE TRANSCEIVERS | JOHNSTON MATTHEW |
| DUAL CONDENSER LOOP HEAT PIPE FOR SATELLITES WITH SUN-NORMAL RADIATORS | DROLEN BRUCE L |
| INJECTION SYSTEM AND METHOD FOR INJECTING A CYLINDRICAL ARRAY OF DISCRETE LIQUID JETS | ANDERSON JEFFERY S |
| MODULAR TOOLING FIXTURE WITH INTERCHANGEABLE PANEL DEFINING A TOOLING SURFACE | OLBERG JEFFREY H |
| RADIUSED LEAD-IN FOR INTERFERENCE FIT FASTENERS | SIMPSON BLAKE A |
| TAPERED LEAD-IN FOR INTERFERENCE FIT FASTENERS | SIMPSON BLAKE A |
| METHOD AND TOOL FOR REMOVING A TAPERED SLEEVE BOLT FROM A COMPONENT | HARE JOHN RICHARD |
| METHODS FOR ADDITIVELY MANUFACTURING COMPOSITE PARTS | EVANS NICK S |
| APPARATUS FOR VOID-FREE DEBULKING OF ADHESIVE BOND JOINTS | WATSON MEGAN NICOLE |
| FLEXIBLE CONTROL SURFACES AND RELATED METHODS | ETLING KEITH ALLAN |
| ELECTRONIC STOWAGE BIN CONTROL SYSTEMS AND METHODS | SIMMS RICHARD K |
| VEHICLES INCLUDING ELECTRONIC STOWAGE BIN CONTROL SYSTEMS | SIMMS RICHARD K |
| VEHICLE STOWAGE BIN ASSEMBLIES HAVING WEIGHT SENSORS | SIMMS RICHARD K |
| INBAND TELEMETRY FOR A VIRTUAL TRANSPONDER | MILLER KRISTINA |
| REUSABLE APPLICATOR AND RELATED METHOD | PRINGLE JOHN W IV |
| CARPET DISPLAY SYSTEMS AND METHODS | IBRAHIM YAKENTIM |
| VENTED HINGE ASSEMBLY | HANRATTY DERRICK J |
| BATTERY CELL DESIGN FOR PREVENTING INTERNAL SHORT CIRCUITS FROM OCCURRING AND PROPAGATING | LIU SHENGYI |
| GAS TURBINE ENGINE FAN BLADE CONTAINMENT SYSTEMS | FRACCHIA CARLOS ANGELO |
| AUTOMATED OBJECT TRACKING IN A VIDEO FEED USING MACHINE LEARNING | PAN JAN WEI |
| SYSTEMS AND METHODS FOR AN IMMERSIVE SIMULATOR | BIDDLE ELIZABETH MARIE |
| ATMOSPHERIC AIR MONITORING FOR AIRCRAFT FIRE SUPPRESSION | MEIS CHARLES |
| COMPOSITE PART AND METHOD FOR MAKING COMPOSITE PART | SUNDQUIST DAVID J |
| SYSTEM AND METHOD FOR MANUFACTURING A COMPOSITE STRUCTURE | HASAN ZEAID F |
| SPLICE ASSEMBLY FOR JOINING STRUCTURAL COMPONENTS | REEVES ANDREW C |
| VIBRATION DAMPING LINK AND METHOD THEREFORE | LUDIN DOUGLAS R |
| PLASMA SWITCHED ARRAY ANTENNA | SAVAGE LARRY L |
| SYSTEM AND METHOD OF MONITORING DATA TRAFFIC ON A MIL-STD-1553 DATA BUS | ECKHARDT JOSH D |
| METHOD FOR MEASURING RESIDUAL STRAIN FOR CURED COMPOSITE PART | GU HAOZHONG |
| NANO-REINFORCEMENT FILLER MATERIAL FOR EPOXY RESIN SYSTEMS AND METHODS OF MAKING THE SAME | PRAKASH OM |
| BLADE-AND-SLOT JOINTS THAT UNITE COMPOSITE PANELS VIA INTERNAL BLADES | GOOCH PAUL |
| PULTRUSION SYSTEM AND METHOD THAT APPLY LENGTHWISE CURVATURE TO COMPOSITE PARTS | KLIMOVSKI ANDREW |
| ENGINE TURNING MOTOR VIA PNEUMATIC OR HYDRAULIC MOTOR | KARNOFSKI KENT E |
| AIRCRAFT RADOME APPARATUSES AND METHODS | SCLAFANI ANTHONY JOSEPH |
| HIGH DATA INTEGRITY PROCESSING SYSTEM | BOETTJER BRUCE A |
| PICK AND PLACE END EFFECTOR | STONE PAUL R |
| METHOD FOR MANUFACTURING A THRUST REVERSER CASCADE AND THRUST REVERSER CASCADE | HARPAL NAIMISHKUMAR |
| METHOD OF CREATING LARGE COMPLEX COMPOSITE PANELS USING CO-CONSOLIDATION OF THERMOPLASTIC MATERIAL SUBPANELS | COMINSKY KENNETH D |
| WIDEBAND ANTENNA SYSTEM | CAI LIXIN |
| LAVATORY DEBRIS REMOVAL | CHILDRESS JAMES |
| ANTENNA INTEGRATED PRINTED WIRING BOARD | NAVARRO JULIO ANGEL |
| INKJET PRINTING SYSTEM HAVING DYNAMICALLY CONTROLLED INK RESERVOIR | BAKER RICHAR J |
| CARGO COMPARTMENT INDICATION FOR TIE DOWN RESTRAINT LOCATIONS | NOE DARRIN M |
| OPTIMIZED REAL-TIME ANTISKID CONTROL INITIALIZATION FOR TRAVEL SURFACES AS A FUNCTION OF WHEEL SPINUP | GRIFFITH THOMAS TODD |
| WING FOLD SYSTEM WITH LATCH PINS THROUGH MULTIPLE MATING LUGS | GOOD MARK STEVEN |
| ROTATING DEVICES FOR MITIGATION OF ADVERSE FLOW CONDITIONS IN AN ULTRA-SHORT NACELLE INLET | DORSEY ANDREW M |
| FAULT COVERAGE FOR MULTIPLE FAILURES IN REDUNDANT SYSTEMS | MATSUI GEN |
| ADDITIVE MANUFACTURING USING A FIBER-REINFORCED FEEDSTOCK LINE | WILENSKI MARK S |
| AIRCRAFT FLOOR PANEL FLOATING CONNECTION SYSTEM | MILLS CHRISTOPHER J |
| SKIN-PANEL INTERFACE OF AN AIRCRAFT | ZEON YOUNG L |
| SYSTEMS AND METHODS FOR CORRECTING ACOUSTIC ERROR IN PRESSURE SENSORS | SATO SHO |
| INTEGRATED SLAT CHINE APPARATUS | LEOPOLD DAVID DANIEL |
| CYBER SECURITY SYSTEM WITH ADAPTIVE MACHINE LEARNING FEATURES | GLATFELTER JOHN W |
| ACOUSTIC CAVITY TAILORED SYNTHETIC JET | GRIFFIN STEVEN F |
| SUPPRESSION OF BACKGROUND CLUTTER IN VIDEO IMAGERY | PETERSON SCOTT M |
| METHOD FOR RECOVERING CARBON FIBERS FROM COMPOSITE WASTE | SUI GANG |
| METHOD FOR FORMING A PART BY AUTOMATED FIBER PLACEMENT | DRUMHELLER MICHAEL |
| METHODS AND SYSTEMS FOR AIRCRAFT LIGHTNING STRIKE PROTECTION | PRAKASH OM |
| TRANSPORT ELEMENT CLAMP SYSTEM | GILBERTSON MICHAEL L |
| PRESSURE BULKHEAD SYSTEM | DIEP PAUL B |
| ADAPTIVE STRUCTURAL CORE FOR MORPHING PANEL STRUCTURES | HENRY CHRISTOPHER P |
| SIDELOAD REACTION BEARING | GRUNER BRYAN J |
| FAIRING ASSEMBLY AND METHOD THEREFOR | BEST MICHAEL J |
| TAILORING HIGH STRENGTH ALUMINUM ALLOYS FOR ADDITIVE MANUFACTURING THROUGH THE USE OF GRAIN REFINERS | WILSON PAUL N |
| AIRCRAFT ARRIVAL DETERMINATION SYSTEMS AND METHODS | SCHWARTZ SAMANTHA A |
| TWO-PART SNAP-TOGETHER FEEDTHROUGHS | REHDER ERIC M |
| METHODS FOR MANUFACTURING COMPONENTS HAVING SPATIALLY GRADED PROPERTIES | YOUSEFIANI ALI |
| METHODS AND APPARATUS TO COUPLE A DECORATIVE LAYER TO A PANEL VIA A HIGH-BOND ADHESIVE LAYER | WILDE JOHN |
| SYSTEM AND METHOD FOR RESTRAINING CARGO | QUIXANO MENDEZ GABRIEL A |
| SYSTEM AND METHOD FOR EDGE LENGTH DIFFERENTIAL MEASUREMENT FOR FIBER STEERING IN AUTOMATED FIBER PLACEMENT | BLOM-SCHIEBER ADRIANA WILLEMPJE |
| MOBILE COMPUTING DEVICE AND METHOD OF TRANSMITTING DATA THEREFROM | WYNN BRADLEY SHAWN |
| SYSTEM AND METHOD FOR ADDITIVELY MANUFACTURING AN OBJECT | WILENSKI MARK S |
| FEEDSTOCK LINES FOR ADDITIVE MANUFACTURING OF AN OBJECT, AND SYSTEMS AND METHODS FOR CREATING FEEDSTOCK LINES | WILENSKI MARK S |
| FEEDSTOCK LINES FOR ADDITIVE MANUFACTURING OF AN OBJECT AND METHODS FOR CREATING FEEDSTOCK LINES | WILENSKI MARK S |
| AIRPLANE TAKEOFF TRIMS UTILIZING STABILIZERS AND ELEVATORS | LEE JONATHAN P |
| SYSTEMS AND METHODS FOR DETECTING IMPACTS TO VEHICLE SURFACES | KNEUPER NILS |
| DUAL PROTECTION INNER SEAL WASHER FOR ELECTROMAGNETIC EFFECTS (EME) FASTENERS | MORDEN SEAN D |
| METHODS FOR MEASURING AND INSPECTING STRUCTURES USING CABLE-SUSPENDED PLATFORMS | TROY JAMES J |
| SYSTEMS AND METHODS FOR FACILITATING TRULY RANDOM BIT GENERATION | HOWE WAYNE R |
| FLIGHT SIMULATOR | REDKOLES PAUL LEE |
| SYSTEMS AND METHODS FOR FACILITATING DATA ENCRYPTION AND DECRYPTION AND ERASING OF ASSOCIATED INFORMATION | HUNT JEFFREY H |
| AEROSPACE VEHICLE ENVIRONMENTAL CONTROL SYSTEM | SPACE DAVID R |
| ADAPTIVE THINNING OF AN ACTIVE ELECTRONIC SCAN ANTENNA FOR THERMAL MANAGEMENT | PETERSON DAVID BRIAN |
| METHOD FOR CONSTRUCTING SECURE HASH FUNCTIONS FROM BIT-MIXERS | HARS LASZLO |
| A SYSTEM AND METHOD FOR SECURE COMMUNICATION | ANDREWS ERIC J |
| DEVICES AND METHODS FOR DIVERTING MOISTURE FROM A SUPPORT MEMBER | HITCHCOCK CORY M |
| INTERACTIVE DIMMABLE WINDOW SYSTEMS AND METHODS | IBRAHIM YAKENTIM M |
| PYROMETER CONTROL FOR HOT DRAPE FORMERS | SUNDQUIST DAVID J |
| TITANIUM-BASED ALLOY AND METHOD FOR MANUFACTURING A TITANIUM-BASED ALLOY COMPONENT BY AN ADDITIVE MANUFACTURING PROCESS | COTTON JAMES DEAN |
| METHODS AND APPARATUS TO REDUCE STATIC PRESSURE MEASURING ERROR | CHUCK CHEN |
| SEATING SYSTEM AND METHOD OF CONFIGURING SUCH SEATING SYSTEM | MOVSESIAN SAMI |
| UNSUPERVISED MULTIVARIATE RELATIONAL FAULT DETECTION SYSTEM FOR A VEHICLE AND METHOD THEREFOR | BOGGIO JOHN M |
| VEHICLE FAULT DETECTION SYSTEM AND METHOD UTILIZING GRAPHICALLY CONVERTED TEMPORAL DATA | BOGGIO JOHN M |
| AN INTERLAYERED STRUCTURE FOR JOINING DISSIMILAR MATERIALS AND METHOD OF JOINING BY FIRCTION OF SUCH AN INTERLAYERED STRUCTURE | MANN AUSTIN E |
| TOOLING ASSEMBLY AND METHOD FOR INSTALLATION OF A FRANGIBLE FASTENER | JOHNSON JOSHUA R |
| LOCATION DETERMINATION OF AN EMITTER USING FREQUENCY-OF-ARRIVAL (FOA) MEASURED FROM A SINGLE MOVING PLATFORM | PHEIFFER BRIAN K |
| COUNTER-FIELD WINDING IN ELECTRICAL GENERATOR | GAO LIJUN |
| UNMANNED AERIAL VEHICLE (UAV) LANDING SYSTEMS AND METHODS | STERLING MILLIE IRENE |
| ROTATABLE SYSTEM FOR REMOVING GAS FROM A SEALANT | PODNAR GREGG W |
| CARBON NANOMATERIAL COMPOSITE SHEET AND METHOD FOR MAKING THE SAME | BRALEY DANIEL J |
| STRESS SENSOR | ZANCHI ALFIO |
| INDEPENDENT SPEED VARIABLE FREQUENCY ALTERNATING CURRENT GENERATOR | GAO LIJUN |
| SYSTEMS AND METHODS FOR POWERING AN ELECTRIC AERIAL VEHICLE | TILLOTSON BRIAN |
| ULTRASONIC INSPECTION OF A STRUCTURE WITH A RAMP | TAT HONG HUE |
| THERMOGRAPHY INSPECTION FOR NEAR-SURFACE INCONSISTENCIES OF COMPOSITE STRUCTURES COMBINED WITH ULTRASONIC INSPECTION | TAT HONG HUE |
| MICROSTRUCTURE REFINEMENT METHODS BY MELT POOL STIRRING FOR ADDITIVE MANUFACTURED MATERIALS | GHABCHI ARASH |
| SYSTEM AND METHOD FOR APPLYING VACUUM PRESSURE TO COMPOSITE PARTS | LOUIE MICHAEL KENNETH-QUE |
| WIRELESS TAMPER DEVICE | PRICE WADE |
| CURVED HEAT SHRINK TUBING AND METHODS OF MAKING THE SAME | SINCLAIR JAMES R |
| APPARATUS AND METHOD FOR MANUFACTURING LIQUID MOLDED COMPOSITES USING A DISCRETE NETWORK OF TOOL SURFACE RESIN DISTRIBUTION GROOVES | DONGRE KAUSTUBH |
| PRE-DEFORMED AIRCRAFT SPOILERS AND DROOP PANELS DESIGNED TO SEAL WITH FLAP IN DEFLECTED STATE | KORDEL JAN A |
| METHOD AND APPARATUS FOR FORMING COMPOSITE PLIES ON CONTOURED TOOL SURFACES | JOHNSON BRICE A |
| INDUCTION HEATING CELL WITH CAULS OVER MANDRELS AND METHOD OF USING IT | MATSEN MARC R |
| CORE STRUCTCRES FOR COMPOSITE PANELS OF AN AIRCRAFT, COMPOSITE PANELS AND AIRCRAFT INCLUDING THE CORE STRUCTURES, AND METHODS OF MANUFACTURING THE COMPOSITE PANELS | BRALEY DANIEL J |
| ADDITIVE MANUFACTURED TOOL ASSEMBLY | DECK ERIC ELDON |
| APPARATUS AND METHOD FOR MAINTENANCE OF WIND TURBINE BLADES | GEORGESON GARY E |
| APPARATUSES AND METHODS FOR DEPOSITING AN EXTRUDABLE SUBSTANCE ONTO A SURFACE | PRINGLE-IV JOHN W |
| APPARATUSES AND METHODS FOR DISPENSING A BRUSHABLE SUBSTANCE ONTO A SURFACE | PRINGLE-IV JOHN W |
| APPARATUSES AND METHODS FOR DISPENSING A BRUSHABLE SUBSTANCE ONTO A SURFACE | PRINGLE-IV JOHN W |
| APPARATUSES AND METHODS FOR DEPOSITING AN EXTRUDABLE SUBSTANCE ONTO A SURFACE | PRINGLE IV JOHN W |
| SYSTEMS AND METHODS FOR MAKING AND USING A FITTED CAP FOR APPLYING A SHAPED SEALANT SHROUD TO A PORTION OF A FASTENER | PILLAY GANESH R |
| LATENCY COMPENSATION IN COUPLED PROCESSOR SYSTEMS | STULKEN DAVID E |
| COUNTERMEASURES TO FREQUENCY ALTERATION ATTACKS ON RING OSCILLATOR BASED PHYSICAL UNCLONABLE FUNCTIONS | HARS LASZLO |
| CLOSED CHAMBER ABRASIVE FLOW MACHINE SYSTEMS AND METHODS | DE SILVA KANDAUDAGE CHANNA RUWAN |
| APPARATUS TO VARY AN AIR INTAKE OF AIRCRAFT ENGINES | KAWAI RONALD TATSUJI |
| FASTENERS HAVING ENHANCED ELECTRICAL ENERGY DISPERSION PROPERTIES | SISCO TANNI |
| MANAGEMENT SYSTEM FOR UNMANNED AERIAL VEHICLES | MCIVER JOHN L |
| AIRCRAFT PASSENGER LUGGAGE BIN LOAD WEIGHT AND BALANCE SYSTEM | ZAJAC MICHAL |
| METHODS AND SYSTEMS FOR DETERMINING AIRSPEED OF AN AIRCRAFT | LUO JIA |
| TESTING A BATTERY | KILLELEA ELIZABETH |
| SYSTEM AND METHOD FOR OPERATING AN INDEPENDENT SPEED VARIABLE FREQUENCY GENERATOR AS A STARTER | LIU SHENGYI |
| TORQUE TUBE ASSEMBLIES FOR USE WITH AIRCRAFT HIGH LIFT DEVICES | MEYER MARK ROBERT |
| DISTRIBUTED TRAILING EDGE WING FLAP SYSTEMS | HUYNH NEAL V |
| AUTOMATIC TAMPERING DETECTION IN NETWORKED CONTROL SYSTEMS | THUMATI BALAJE T |
| LANDING GEAR STRUT ASSEMBLY AND METHOD THEREFOR | JOHNSON MICHAEL PATTERSON |
| FIRE-RESISTANT, GAS PERMEABLE DECORATIVE LAMINATE | WILDE JOHN C |
| SMART SUSCEPTORS | HENSON LANDON K |
| DEVICE TO ESTIMATE AIRCRAFT INFORMATION | GOLSHANY SINA S |
| AXISYMMETRIC THINNED DIGITAL BEAMFORMING ARRAY FOR REDUCED POWER CONSUMPTION | WERNTZ PAUL |
| UNDERWATER ENERGY HARVESTING DRONE AND METHOD FOR OPERATION | HILLER NATHAN D |
| AIRCRAFT PRIVACY DOOR AND DOOR FRAME ASSEMBLY | MOVSESIAN SAMI |
| KINETIC ENERGY ABSORPTION METHOD AND ABSORPTIVE COMPOSITE ARTICLE | WILENSKI MARK S |
| KINETIC ENERGY ABSORPTIVE COMPOSITE ARTICLE AND ABSORPTION METHOD | WILENSKI MARK S |
| KINETIC ENERGY ABSORPTION METHOD AND KINETIC ENERGY ABSORPTIVE, REINFORCED, COMPOSITE ARTICLE | WILENSKI MARK S |
| METHODS AND APPARATUS FOR CONTROLLING LANDING GEAR RETRACT BRAKING | HUBBARD TAYLOR R |
| HYBRID TURBINE JET ENGINES AND METHODS OF OPERATING THE SAME | BARMICHEV SERGEY D |
| LASER ULTRASOUND SCANNING FOR VISUALIZING DAMAGE OR IRREGULARITIES | IHN JEONG-BEOM |
| METHODS FOR ADDITIVELY MANUFACTURING COMPOSITE PARTS | EVANS NICK S |
| EDGE DELAMINATION METHODS AND SYSTEMS | DREXLER JASON W |
| STRINGER TRANSITION THROUGH A COMMON BASE CHARGE | CASS GREGORY A |
| FLOOR PANELS AND FLOORING SYSTEMS FOR A PASSENGER VEHICLE, AND METHODS FOR INSTALLATION | HESSLEWOOD SEAN RICHARD |
| DIRECTIONAL FLOW CONTROL DEVICE | ECKOLS DAVID ANSYL |
| ROLLABLE SOLAR POWER MODULE WITH IN-PLANE INTERCONNECTS | WATERMAN DALE H |
| BLOCKCHAIN FORTIFIED AIRCRAFT COMMUNICATIONS ADDRESSING AND REPORTING SYSTEM (ACARS) COMMUNICATION | MITCHELL TIMOTHY M |
| HINGE PINS FOR FOLDABLE AIRCRAFT WINGS | KAMILA ERIC S |
| COOLING SYSTEM, AIR CONDITIONING PACK, AND METHOD FOR CONDITIONING AIR | BEHRENS WILLIAM WEBSTER |
| SINGLE-WAVELENGTH BIDIRECTIONAL TRANSCEIVER WITH INTEGRATED OPTICAL FIBER COUPLER | CHAN ERIC Y |
| WING FLAP WITH TORQUE MEMBER AND METHOD FOR FORMING THEREOF | KORDEL JAN A |
| WING FLAP WITH TORQUE MEMBER AND METHOD FOR FORMING THEREOF | KORDEL JAN A |
| HEALTH MONITORING OF AIRCRAFT LANDING GEAR MECHANICAL STRUCTURES | DONG JOHN J |
| POLYMER NANOPARTICLES FOR IMPROVED DISTORTION CAPABILITY IN COMPOSITES | WILENSKI MARK S |
| MOBILE ROUTING FOR NON-GEOSTATIONARY ORBIT (NGSO) SYSTEMS USING VIRTUAL ROUTING AREAS (VRAS) | SCOTT JAMES P |
| SOLID LAMINATE STRINGER | CHENG JIANGTIAN |
| FLAP ACTUATOR SYSTEM | HUYNH NEAL V |
| HETEROJUNCTION SOLAR CELL | BOISVERT JOSEPH CHARLES |
| HYDRAULIC SYSTEM FOR AN AIRCRAFT | FOX MICHAEL THOMAS |
| SYSTEM AND METHOD FOR PULSE-WIDTH MODULATION USING AN ADJUSTABLE COMPARISON CRITERION | CAMERON DOUGLAS C |
| CARGO RESTRAINT SENSOR SYSTEM | WEISFELNER JUSTIN LOUIS |
| HYBRID PROPULSION ENGINES FOR AIRCRAFT | MACKIN STEVE G |
| APPARATUS THAT SUPPORTS AN AIRCRAFT FUSELAGE WITHOUT EXTERIOR SURFACE CONTACT | MOORE MATTHEW B |
| FLOW MULTIPLIER SYSTEMS FOR AIRCRAFT | MACKIN STEVE G |
| X-RAY INSPECTION SYSTEM AND METHOD FOR PIPES | SAFAI MORTEZA |
| GENERATING A PLURALITY OF CURVED TRANSITIONS CONNECTING PLANAR PARALLEL ALTERNATING PATHS FOR FORMING A WORKPIECE | PETERS JUSTIN L |
| ELECTROMAGNETIC RECEPTION USING METAMATERIAL | WILLIAMS JOHN DALTON |
| SYSTEM AND METHOD FOR POSITION AND SPEED FEEDBACK CONTROL | CAMERON DOUGLAS C |
| OPTIMIZED PITCH AND ROLL CONTROL APPARATUS FOR AN AIRCRAFT | ELLIOTT JOSEPH E |
| DROP DRAW/EXTRUDE PRINTING METHOD | HOWE CHRISTOPHER A |
| COMPOSITE PANEL HAVING MULTIPLE FACESHEETS AND A CORE | HUMFELD KEITH DANIEL |
| SURFACE QUALITY OF COMPOSITE STRUCTURES | LOUIE MICHAEL KENNETH-QUE |
| AIDING MANEUVERING OF OBSCURED OBJECTS | CRAMBLITT ROBERT MERRILL |
| METHODS AND SYSTEMS FOR INCORPORATING TRANSLATING BACKPLANES TO FACILITATE WIRE SEPARATION | SHANDER MARK STEPHEN |
| APPARATUS THAT SUPPORTS AN AIRCRAFT FUSELAGE WITHOUT EXTERIOR SURFACE CONTACT | MOORE MATTHEW B |
| SUPERCHARGING SYSTEMS FOR AIRCRAFT ENGINES | MACKIN STEVE G |
| VARIABLE FREQUENCY INDEPENDENT SPEED MOTOR | GAO LIJUN |
| MULTI-USE OPTICAL DATA, POWERLINE DATA, AND GROUND POWER INTERFACE FOR AIRPLANE FACTORY AUTOMATION | LEE DONALD B |
| MULTI-USE OPTICAL DATA, POWERLINE DATA, AND GROUND POWER INTERFACE FOR AN AIRPLANE | LEE DONALD B |
| SLEEP SYSTEMS FOR AIRCRAFT | AUNG NYEIN CHAN |
| DEPLOYABLE PARTITION SYSTEMS AND METHODS FOR SEAT ASSEMBLIES | COLLETTI BRIAN |
| COMBINED RADAR AND COMMUNICATIONS SYSTEM USING COMMON SIGNAL WAVEFORM | RAY GARY ALAN |
| GIMBAL WITH ENHANCED RING ASSEMBLY FOR RAPID TOOL INTERCHANGE | COOK REBECCA LEIGH |
| SCREW ACTUATOR, AIRCRAFT COMPRISING A SCREW ACTUATOR, AND METHOD OF LIFTING A LOAD | BURGESS MICHAEL J |
| CASCADE ASSEMBLY FOR A JET ENGINE THRUST REVERSER | CHUCK CHEN |
| CHOPPED FIBER ADDITIVE MANUFACTURING VOID DETECTION | SAFAI MORTEZA |
| MULTI-LAYER BACK SURFACE FIELD LAYER IN A SOLAR CELL STRUCTURE | XING-QUAN LIU |
| BI-METALLIC INDUCTION HEATING BLANKET | HULL JOHN RALPH |
| A SYSTEM AND METHOD FOR PROTECTING A SURFACE FROM UV RADIATION | GROSS ADAM F |
| METHOD AND SYSTEM FOR GENERATING A LAYUP PLAN FOR FORMING A COMPOSITE LAMINATE | MOORE JERON D |
| BLIND FASTENER SYSTEM WITH ELECTROMAGNETIC EFFECTS-PROTECTIVE COATING | SIMPSON BLAKE A |
| RETAINED SELF-ALIGNING WASHER AND NUT ASSEMBLY AND METHOD FOR FABRICATION BY ADDITIVE MANUFACTURING | STOROZUK MARC |
| METHODS FOR FORMING A COMPOSITE BLADE STIFFENER AND FACILITATING APPLICATION OF BARELY VISIBLE IMPACT DAMAGE TREATMENTS | CARLSON LISA C |
| EXTENDED DURATION REGENERATIVE POWERED UNMANNED AERIAL VEHICLE (UAV) PLATFORM | KIRKBRIDE DAVID W |
| JET NOISE SUPPRESSOR | SHEN HAO |
| METHOD FOR PRODUCING A COMPOSITION WITH SOLUBLE NANOPARTICLES FOR COMPOSITE PERFORMANCE ENHANCEMENT | KOZAR MICHAEL P |
| ACOUSTIC PANEL FOR THRUST REVERSERS | CURAUDEAU ALEXANDRE D |
| SYSTEMS AND METHODS OF ANALYZING A SOFTWARE COMPONENT | KOSPIAH SHAUN S |
| SURFACE REACTIVATION TREATMENT | SIMONS RANYA |
| SIDEWALL MOUNTING HARDWARE FOR AIRCRAFT | HITCHCOCK CORY M |
| AIRCRAFT LANDING GEAR STEERING SYSTEMS AND METHODS WITH ENHANCED SHIMMY PROTECTION | LINDAHL GARY M |
| OPTICAL CONNECTOR | CHAN ERIC Y |
| A METHOD OF FORMING A BARREL STRUCTURE | THRASH PATRICK J |
| DRY FLOOR LIQUID DISPOSAL SYSTEM | CHILDRESS JAMES JOHNATHAN |
| WORK PLATFORM MOVER SYSTEM | RICHARDS CHARLES M |
| WING PANEL ASSEMBLY SYSTEM AND METHOD | WELLER DENNIS MICHAEL |
| OPEN-CORE FLYWHEEL CONSTRUCTION | HULL JOHN R |
| APPARATUSES AND METHODS FOR FABRICATING A COMPOSITE STRUCTURE AND REACTING TO A PLACEMENT FORCE | HUMFELD KEITH D |
| SYSTEM AND METHODS FOR BONDING A STRUCTURAL COMPONENT WITHIN A CHANNEL OF A RAIL | BULS DANIEL L |
| CORE-SHELL PARTICLES, COMPOSITIONS INCORPORATING THE CORE-SHELL PARTICLES AND METHODS OF MAKING THE SAME | NOWAK ANDREW P |
| METHOD FOR CURING AND EMBEDDING AN ANTENNA IN A COMPOSITE PART AND ASSOCIATED VEHICLE | BOLTON JOSEPH A |
| MECHANISM FOR INDICATING POSITION OF A LATCH MECHANISM FOR AN AIRCRAFT NACELLE | THOMAS KYLE A |
| GRAVITY COMPENSATION FOR SELF-PROPELLED ROBOTIC VEHICLES CRAWLING ON NON-LEVEL SURFACES | GEORGESON GARY E |
| EPOXY-FREE PLASTIC OPTICAL FIBER SPLICE DESIGN AND FABRICATION PROCESS | KOSHINZ DENNIS G |
| LOCKING HOLE PLUG FOR SEALING HOLES IN COMPOSITE STRUCTURES | LEWIS MELISSA H |
| AIRCRAFT FOLDING WING TIPS WITH STOP PADS | KAMILA ERIC S |
| LEWIS BASE-MEDIATED RECOVERY OF FIBERS FROM FIBER REINFORCED POLYMERS | GROSS ADAM F |
| MINIATURE, PORTABLE MOTION PLATFORMS FOR SIMULATING FLIGHT MOVEMENTS | BIDDLE ELIZABETH MARIE |
| ANTI-MICROBIAL DECORATIVE LAMINATE | YOUNG STEPHEN |
| AIRCRAFT CARGO ROLLER PANEL | CLOS WILLIAM R |
| METHODS AND SYSTEMS FOR IDENTIFYING ASSOCIATED EVENTS IN AN AIRCRAFT | MARTIN CHARLES E |
| METHODS FOR CONSOLIDATING/MOLDING NEAR NET-SHAPED COMPONENTS MADE FROM POWDER | MATSEN MARC R |
| LANDING GEAR SHRINK LINK MECHANISM | ALLEY CHRISTOPHER M |
| SECURED MULTI-PAYLOAD ANTENNAS OPERATORS OPERATIONS | CHEN YI-FENG JAMES |
| ANTENNA HORN, ANTENNA, AND ANTENNA ARRAY FOR A RADIATING PRINTED CIRCUIT BOARD, AND METHODS THEREFOR | WOOLRICH KYLE A |
| HIGH ALTITUDE INTERNAL COMBUSTION ENGINE/TURBOCHARGER EXHAUST COMBUSTOR | BIGBEE-HANSEN WILLIAM JOHN |
| UNIVERSAL BROADBAND PHOTODETECTOR DESIGN AND FABRICATION PROCESS | CHAN ERIC Y |
| MOBILE FIXTURE APPARATUSES AND METHODS | VANCE JONATHAN B |
| SPACECRAFT AND SPACECRAFT RADIATOR PANELS WITH COMPOSITE FACE-SHEETS | ASTON RICHARD W |
| CORROSION RESISTANT ADHESIVE SOL-GEL | SCHUETTE WAYNIE M |
| METHODS AND SYSTEMS FOR IDENTIFYING AN INTERNAL FLAW IN A PART PRODUCED USING ADDITIVE MANUFACTURING | CHATTOPADHYAY ADITYA |
| DOUBLE SHELL FASTENER CAPS | ROPER CHRISTOPHER STEPHEN |
| LIGHTNING DIRECT EFFECTS (LDE) TESTING SYSTEM AND METHOD USING A DIGITALLY-CONTROLLED REFERENCE LIGHT SOURCE | KHOSRAVANI SHAHRIAR |
| METHODS AND APPARATUS FOR PROVIDING CONTINUOUS FLIGHT TRAJECTORIES FOR AIRCRAFT | HEIBERG CHRISTOPHER J |
| HYBRID ACOUSTIC AND INDUCTION-HEATING SYSTEMS FOR IMPEDING FORMATION OF ICE | HULL JOHN RALPH |
| METHOD AND APPARATUS TO FORM VENTING PATHWAYS IN PRESSURE SENSITIVE ADHESIVES FOR LAMINATE STACKS | DREXLER JASON W |
| WINDOW ASSEMBLY FOR USE IN A VEHICLE | SWITZER LON ERIC |
| COMPOSITE FABRIC WING SPAR WITH INTERLEAVED TAPE CAP PLIES | BEHZADPOUR FOROUZAN |
| OVERHEAD PAYLOAD MODULE WITH INTEGRATED STOWBINS | YOUNG STEPHEN M |
| DISTRIBUTED LINEAR HYDRAULIC HIGH LIFT ACTUATION SYSTEM WITH SYNCHRONIZATION MEMBERS | GOOD MARK S |
| METHOD FOR PRINTING AN IMAGE ON A SURFACE | MATHIS DENNIS R |
| METHOD AND APPARATUS FOR ATTACHING A FUSELAGE FRAME TO A WING BOX | COMINSKY KENNETH D |
| BLOCKER DOOR PRESSURE RELIEF SYSTEMS AND METHODS | DE PAU ROBERT JR |
| AIRCRAFT FLIGHT INFORMATION SYSTEM AND METHOD | MECKLEM SARAH A |
| SYSTEMS AND METHODS FOR REUSE OF SPECTRUM RESOURCES | FOSTER CHRISTOPHER JASON |
| HOT-FORMING PRESS AND METHODS OF HOT-FORMING WORKPIECES | SANDERS DANIEL GORDON |
| MODULAR TOOL INSERTS FOR COMPOSITE PART MANUFACTURING AND RELATED METHODS | MEURE SAM |
| SLAT END SEAL AND METHOD FOR MANUFACTURING THE SAME | DOVEY JOHN |
| APPARATUSES AND METHODS FOR INSTALLING ELECTRICAL CONTACTS INTO A CONNECTOR HOUSING | WRIGHT DAVID S |
| PIVOT FLEXURE WITH UNIFORM MOMENT STIFFNESS | LAZZARO ANTHONY A |
| ALIGNING AIRCRAFT WITH RUNWAY CENTERLINE DURING TAKEOFF | DAME STEPHEN G |
| SELF-THREADING LAMINATION HEAD AND METHOD | SHAW PAUL D |
| SYSTEM AND METHOD FOR CONCURRENTLY LAMINATING AND TRIMMING A COMPOSITE LAMINATE | MODIN ANDREW E |
| BI-DIRECTIONAL LAMINATION HEAD AND METHOD | SHAW PAUL D |
| ESTABLISHING ELECTRONICS IN COMPOSITE PARTS BY LOCATING ELECTRONICS ON LAY-UP MANDRELS | HUMFELD KEITH D |
| AUTOMATED FASTENING MACHINE USING A COMPOUND CONTOUR VACUUM TRACK FOR AUTOMATION OF FINAL ASSEMBLY FROM THE INTERIOR OF A FUSELAGE | CHAN KOWK TUNG |
| AUTOMATED METHODS AND APPARATUS FOR INSTALLING A SLEEVE ON A CABLE | DUNCAN GRACE L |
| ADDITIVE MANUFACTURING APPARATUS AND SYSTEM WITH VACUUM ASSEMBLY, AND METHOD OF USING THE SAME | SIEVERS DANIEL E |
| AUTOMATED DEPLOYABLE FENCES FOR AIRCRAFT WINGS | TILLOTSON BRIAN |
| BOOTSTRAP HYDRAULIC RESERVOIR | PLAMONDON MORGAN MICHAEL |
| JAM MITIGATION IN AIRCRAFT FLY-BY-WIRE SYSTEMS AND RELATED METHODS | HUYNH NEAL V |
| METHOD FOR INSTALLING TEMPORARY FLOOR BOARDS INTO A FUSELAGE OF AN AIRCRAFT | AYYAGARI ARUN |
| METHODS AND SYSTEMS FOR PERFORMING AIRCRAFT MAINTENANCE | HANOV NILE |
| DYNAMIC PATHLOSS MITIGATION | JOHNSTON MATTHEW |
| SPACE DEBRIS REMOVAL | DUNN MICHAEL J |
| DESIGNING A STRUCTURAL PRODUCT | ABAD SAMIR |
| NEGATIVE-SLOPE VOLTAGE-FREQUENCY FOR STARTING A VARIABLE FREQUENCY INDEPENDENT SPEED MOTOR AND SPEED CONTROL | GAO LIJUN |
| INTERLOCKING BLOCKCHAINS FOR AIRCRAFT PART HISTORY AND CURRENT AIRCRAFT CONFIGURATION | JONES NICHOLAS WILLIAM |
| TRANSFORMABLE SEAT ASSEMBLY | SCHULTZ JOHN G |
| DECOMPRESSION PANEL ASSEMBLY AND METHODS OF ASSEMBLING THE SAME | PERKINS THOMAS SETH |
| OPTIMIZED POWER BALANCED LOW THRUST TRANSFER ORBITS UTILIZING SPLIT THRUSTER EXECUTION | NOEL JEFFREY SCOTT |
| CONDUITS FOR TRANSPORTING FLUIDS AND METHODS OF FABRICATING THE SAME | DI CARLO TONY |
| COMPUTER-VISION-BASED AUTONOMOUS OR SUPERVISED-AUTONOMOUS LANDING OF AIRCRAFT | CRAMBLITT ROBERT MERRILL |
| SYSTEM AND APPARATUS FOR FEEDING CABLE INTO CABLE PROCESSING EQUIPMENT | DUNCAN GRACE L |
| EME PROTECTION CAP SYSTEM WITH SCREW SEALANT MECHANISM | AUFFINGER SEAN |
| AIRCRAFT CARGO FLOOR ARCHITECTURE AND METHOD OF MODIFYING THE AIRCRAFT CARGO FLOOR ARCHITECTURE | SPRY MICHAEL D |
| AIRCRAFT WING COMPOSITE RIBS HAVING ELECTRICAL GROUNDING PATHS | WALKER STEVEN PAUL |
| COMPUTER SYSTEM INTEGRITY THROUGH A COMBINATION OF CERTIFIABLE AND QUALIFIABLE SOFTWARE | SANDERS-REED JOHN NEWELL |
| SHEARED EXHAUST NOZZLE | ACHESON KURT E |
| AIRCRAFT MAINTENANCE SYSTEMS AND METHODS | BEST TIMOTHY A |
| SAFETY SYSTEM FOR OPERATIONS HAVING A WORKING FIELD ON AN OPPOSITE SIDE OF A BARRIER FROM A DEVICE | TROY JAMES J |
| BRAKE HEALTH INDICATOR SYSTEMS USING INPUT AND OUTPUT ENERGY | ALAM SHAHRIAR |
| AERODYNAMIC BRAKE SYSTEM AND METHOD | MACKIN STEVE G |
| SYSTEM AND METHOD FOR MAINTAINING COMMUNICATIONS OVER A COVERAGE AREA | FERIA YING J |
| MOLD ASSEMBLY WITH CONNECTORS FOR CLAMPING MOULD PARTS TOGETHER | WILLEMPJE BLOM-SCHIEBER ADRIANA |
| OPERATIONAL FLIGHT ENVELOPE MANAGEMENT SYSTEM | LEOPOLD DAVID DANIEL |
| SYSTEMS AND METHODS FOR POSITIONING AIRCRAFT ENGINE COMPONENTS | WRIGHT ROBERT STEVEN |
| FIRE SEAL ASSEMBLIES FOR AIRCRAFT ENGINES | POND MORGAN A |
https://blog.sciencenet.cn/blog-681765-1360782.html
上一篇：2021年通用电气公司的欧洲局专利状况——重点布局发动机和泵、成型加工作业、发电和输变电技术
下一篇：2021年LG化学公司的欧洲局专利状况——重点布局电池、有机高分子化合物、有机化学技术
扫一扫，分享此博文
全部作者的精选博文
全部作者的其他最新博文
- • 2023年铁路船舶与航空领域中国局专利的发展竞争态势——南京航空航天大学、波音公司、北京全路通信信号研究设计院领先
- • 2023年一般车辆领域中国局专利的发展竞争态势——丰田、本田、比亚迪领先
- • 2023年非金属成型加工领域中国局专利的发展竞争态势——华南理工大学、日东电工株式会社、南京林业大学领先
- • 2023年金属成型加工领域中国局专利的发展竞争态势——华南理工大学、北京科技大学、精工爱普生株式会社领先
- • 2023年分离与混合加工领域中国局专利的发展竞争态势——中石化、中国科学院大连化学物理研究所、万华化学集团领先
- • 2023年药品与化妆品领域中国局专利的发展竞争态势——中国药科大学、江南大学和四川大学领先