|
Full Paper
Microstructures and Mechanical Properties of Commercial Hot-Extruded Copper Processed by Torsion Deformation† AbstractFree-end torsion deformation is used for processing copper rod in this work. Both microstructures and mechanical properties of the torsional rods are quantitatively analyzed. The results show that gradient lamellar dislocation substructures (LDS) along the radial direction as the main defects are formed after torsion. The increment of the LDS density, the shrinking of spacing size, and the change of length/spacing (L/S) ratio of the LDS are all non-monotonic function of torsion revolution. High-density LDS with fine spacing can retain strain hardening capability, which results in good combination of high tensile strength and good ductility in the torsional deformed sample with large number of revolutions. The influence of torsion strain on primary twin boundaries (TBs) in the hot-extruded rod is also discussed.
http://onlinelibrary.wiley.com/doi/10.1002/adem.201600252/full
Archiver|手机版|科学网 ( 京ICP备07017567号-12 )
GMT+8, 2024-7-28 02:17
Powered by ScienceNet.cn
Copyright © 2007- 中国科学报社