||
代表性论文:
[1] W. G. Mao, J. Chen, M. S. Si, R. F. Zhang, Z. B. Peng, C. Y. Dai, Q. S. Ma, D. N. Fang. Study of mechanical properties and cracking extension resistance behavior of C/SiC composites by single edge notched beam and digital image correlation techniques. Materials Science and Engineering: A, 2016, 649:222-228. (IF=2.567)
[2] W. G. Mao, J. M. Luo, C. Y. Dai, Y. G. Shen. Effect of heat treatment on deformation and mechanical properties of 8mol% yttria-stabilized zirconia by Berkovich nanoindentation. Applied Surface Science, 2015, 338(0):92-98. (IF= 2.538)
[3] 陈俊, 佀明森, 张人发, 彭樟保, 毛卫国*, 马青松, 方岱宁, 高温下C/SiC复合材料弯曲断裂性能实时测试和微观结构表征分析, 实验力学, 2015 (EI源刊,已接收)
[4] M. Zhou, W. B. Yao, X. S. Yang, Z. B. Peng, K. K. Li, C. Y. Dai, W. G. Mao*, Y. C. Zhou, C. Lu. In-situ and real-time tests on the damage evolution and fracture of thermal barrier coatings under tension: A coupled acoustic emission and digital image correlation method. Surface and Coatings Technology, 2014, 240:40-47. (IF= 2.199)
[5] J. M. Luo, C. Y. Dai, Y. G. Shen, W. G. Mao*. Elasto-plastic characteristics and mechanical properties of as-sprayed 8mol% yttria-stabilized zirconia coating under nano-scales measured by nanoindentation. Applied Surface Science, 2014, 309(0):271-277. (IF= 2.538)
[6] L. Yang, Q. X. Liu, Y. C. Zhou, W. G. Mao, C. Lu. Finite element simulation on thermal fatigue of a turbine blade with thermal barrier coatings. Journal of Materials Science & Technology, 2014, 30(4):371-380.
[7] J. Wan, M. Zhou, X. S. Yang, C. Y. Dai, Y. Zhang, W. G. Mao *, C. Lu. Fracture characteristics of freestanding 8wt% Y2O3ZrO2 coatings by single edge notched beam and Vickers indentation tests. Materials Science and Engineering: A, 2013, 581(0):140-144. (IF = 2.108)
[8] X. S. Yang, J. Wan, C. Y. Dai, Y. Zhang, W. G. Mao *, Y. C. Zhou, C. Lu. Finite element analysis of crack propagation and fracture mechanical properties of freestanding 8wt.% Y2O3–ZrO2 coatings. Surface and Coatings Technology, 2013, 223:87-91. (IF= 1.941)
[9] W. G. Mao, Y. G. Shen, Nanoindentation study of pop-in phenomenon characteristics and mechanical properties of sapphire (101bar2) crystal, Journal of the American Ceramic Society, 2012, 95(11):3605-3612.
[10] W. B. Yao, C. Y. Dai, W. G. Mao*, C. Lu, L. Yang, Y. C. Zhou. Acoustic emission analysis on tensile failure of air plasma-sprayed thermal barrier coatings. Surface and Coatings Technology, 2012, 206(18):3803-3807. (IF=2.135) (SCI源刊) (通讯作者) (the 8th of the Top 25 Hottest Articles for April to June in 2012)
[11] W. G. Mao, J. Wan, C. Y. Dai, J. Ding, Y. Zhang, Y. C. Zhou, C. Lu. Evaluation of microhardness, fracture toughness and residual stress in a thermal barrier coating system: A modified Vickers indentation technique. Surface and Coatings Technology, 2012, 206(21):4455-4461. (IF=2.135) (SCI源刊)
[12] 毛卫国, 苏鹏, 张瑜, 周孟, 吴多锦. 热障涂层体系界面屈曲破坏实验测试研究. 失效分析与预防, 2012, 7(2):91-95.
[13] 杨雪松, 周孟, 张瑜, 毛卫国*. 在制备过程中热障涂层系统应力场有限元分析. 湘潭大学自然科学学报, 2012, 34(4):27-34.
[14] W. G. Mao, D. J. Wu, W. B. Yao, M. Zhou, C. Lu, Multiscale monitoring of interface failure of brittle coating/ductile substrate systems: a non-destructive evaluation method combined digital image correlation with acoustic emission, Journal of Applied Physics, 2011, 110(8):084903. (IF=2.064)
[15] W. G. Mao, Y. G. Shen, C. Lu, Nanoscale elastic-plastic deformation and stress distributions during nanoindentation in bulk sapphire single crystal, Journal of the European Ceramic Society, 2011; 31(10):1865-1871. (IF=2.574)
[16] W. G. Mao, Y. G. Shen, C. Lu, Investigation of nanoscale pop-in behaviors and mechanical properties of polycrystalline alumina and single-crystal sapphire during nanoindentation, Scripta Materiala, 2011, 65(2):127-130. (IF=2.949) (荣获该刊物2011年4~6月份的25 Top Hottest Articles)
[17] W. G. Mao, J. P. Jiang, Y. C. Zhou, C. Lu, Effects of substrate curvature radius, thickness and deposition temperature on residual stresses in thermal barrier coatings, Surface & Coatings Technology, 2011, 205(8-9):3093-3102. (IF=2.135) (SCI源刊)
[18] D. J. Wu, W. G. Mao*, Y. C. Zhou, C. Lu. Digital image correlation approach to cracking and decohesion in a brittle coating/ductile substrate system. Applied Surface Science, 2011, 257(14):6040-6043. (IF=1.793) (SCI源刊) (Corresponding author)
[19] 苏鹏, 蒋俊平, 毛卫国*. 热循环条件下圆柱结构热障涂层系统应力场演变分析. 湘潭大学自然科学学报, 2011, 33(3):47-53.
[20] 毛卫国, 陈强, 张斌, 万杰, 等离子喷涂热障涂层材料弹性模量与硬度的压痕测试分析, 材料工程, 2011, 10:66-71. (EI)
[21] 王千文, 毛卫国*, 喻明, 等离子喷涂热障涂层隔热性能分析方法, 材料导报, 2011, 25(9):125-128. (通讯作者)
[22] Q. Chen, W. G. Mao*, Y. C. Zhou, C. Lu, Effect of Young’s modulus evolution on residual stress measurement of thermal barrier coatings by XRD, Applied Surface Science, 2010, 256: 7311-7315. (Corresponding author) (IF=1.793) (SCI源刊)
[23] W. G. Mao, Q. Chen, L. Yang, Y. C. Zhou, C. Lu, Effects of piezo-spectroscopic coefficients of 8wt.% Y2O3 stabilized ZrO2 on residual stress measurement of thermal barrier coatings by Raman spectroscopy, Surface & Coatings Technology, 2010, 204: 3573-3577. (IF=2.135) (SCI源刊)
[24] 王千文, 蒋俊平, 毛卫国*, 热循环条件下圆柱结构热障涂层系统应力场有限元分析, 材料导报, 2010, 24(16): 259-264. (通讯作者)
[25] 周益春, 刘奇星, 杨丽, 吴多锦, 毛卫国*. 热障涂层的破坏机理与寿命预测.固体力学学报, 2010. 31(5):504-531.
[26] W. G. Mao, C. Y. Dai, L. Yang, Q. X. Liu, Y. C. Zhou, Interface fracture characteristic and crack propagation investigations of thermal barrier coatings under tensile tests at elevated temperature, International Journal of Fracture, 2008, 151:107-120. (IF=1.1) (SCI源刊)
[27] W. G. Mao, Y. C. Zhou, L. Yang, X. H. Yu, Modeling of residual stresses variation with thermal cycling in thermal barrier coatings, Mechanics of Materials, 2006, 38: 1118-1127. (IF=2.106, SCI源刊) [2011年该文章被《Encyclopedia of Thermal Stresses》收录, 主编Professor Richard B. Hetnarski (英国)].
[28] W. G. Mao, C. Y. Dai, Y. C. Zhou, Q. X. Liu, An experimental investigation on thermo-mechanical buckling delamination failure characteristic of air plasma sprayed thermal barrier coatings, Surface and Coatings Technology, 2007, 201:6217-6227. (IF=1.559, SCI源刊)
[29] W. G. Mao, C. Y. Dai, Y. C. Zhou, X. H. Yu, Thermo-mechanical buckling failure of thermal barrier coatings with arbitrary delamination location, Advances In Vibration Engineering, 2007, 6(2):149-164. (SCI收录)
[30] W. G. Mao, Y. C. Zhou, Failure of thermal barrier ceramic coating induced by buckling due to temperature gradient and creep, Advance Materials Research, 2005, 9: 21-30. (SCI收录)
[31] W. G. Mao, C. Y. Dai, Y. C. Zhou, Q. X. Liu, An experimental investigation of the interface fracture characteristic in air plasma sprayed thermal barrier coating system at ambient and different high temperatures, Key Engineering Materials, 2007, 353:239-242. (SCI收录)
[32] 毛卫国, 戴翠英, 周益春, 在制备过程中热障涂层系统内残余应力场预测, 湘潭大学自然科学学报, 2005, 27(4): 46-52.
[33] 毛卫国, 周益春, 热循环下热障涂层的残余应力场预测, 湘潭大学自然科学学报, 2003, 25(3): 39-47.
[34] 邱明, 毛卫国, 戴翠英, 周益春, 热障涂层应力场的微拉曼光谱技术测试研究, 长沙交通学院学报, 2006, 22(2): 76-80.
[35] L. Yang, Y. C. Zhou, W. G. Mao, C. Lu, Real-time acoustic emission testing based on wavelet transform for the failure process of thermal barrier coatings, Applied Physics Letters, 93, 231906, 2008. (SCI源刊)
[36] L. Yang, Y. C. Zhou, W. G. Mao, Q. X. Liu, Acoustic emission evaluation of the fracture behavior of APS-TBCs subjecting to bondcoating oxidation, Surface and Interface Analysis, 2007, 39: 761-769. (SCI源刊)
[37] L. Yang, Y. C. Zhou, W. G. Mao, Q. X. Liu, Nondestructive impedance spectroscopy evaluation of the bond coat oxidation in thermal barrier coatings, Surface Review and Letters, 2007, 14(5): 935-943. (SCI源刊)
相关专利
[1] 毛卫国, 戴翠英, 何远武, 陈俊, 方岱宁,脆性材料断裂韧性和残余应力原位同步测试方法及装置,2014, (发明申请号:201410260206.8)
[2] 毛卫国, 戴翠英, 何远武, 陈俊, 方岱宁,脆性材料断裂韧性和残余应力原位同步测试方法及装置,2014, (实用新型专利号:ZL 201420312432.1).
[3] 毛卫国, 彭樟保, 戴翠英, 张人发, 佀明森, 方岱宁, 制备适用于高温环境散斑的方法, 2014, (专利号:ZL 201410024991.7).
[4] 毛卫国, 肖敏, 戴翠英, 丁佳, 谢敏, 周望, 邓水凤, 裴永茂, 方岱宁, 一种层状电磁薄膜材料鼓包样品的制备方法, 2013, (专利号:ZL 201310749786.2)
[5] 毛卫国, 丁佳, 戴翠英, 肖敏, 周望, 谢敏, 方岱宁, 一种层状电磁薄膜功能材料鼓包试样的制备方法, 2013, (专利号:ZL 201310594553.X)
[6] 方岱宁, 毛卫国, 冯雪, 李法新, 裴永茂, 于泽军,一种电磁智能材料力电磁耦合行为的鼓泡实验装置,实用新型专利,专利号:ZL 201220226629.4,2012.
[7] 方岱宁, 毛卫国, 冯雪, 李法新, 裴永茂, 于泽军,电磁智能材料力电磁耦合行为的鼓泡实验装置及测试方法,专利号:ZL 201210156426.7,2012.
[8] 毛卫国, 万杰, 陈强, 戴翠英, 肖敏, 周益春, 压痕法测试脆性材料的硬度、断裂韧性和残余应力的装置, 2011 (发明专利号:ZL 201110221197.8)
[9] 毛卫国, 万杰, 陈强, 戴翠英, 肖敏, 周益春, 压痕法测试脆性材料的硬度、断裂韧性和残余应力的装置, 2011 (实用专利号:ZL 201120280201.3)
[10]毛卫国, 周益春, 吴多锦, 杨丽, 一种带热障涂层的叶片热疲劳失效的模拟测试方法, 2010(专利号:ZL 201010000152.3).
[11]周益春, 毛卫国, 吴多锦, 杨丽, 一种用于模拟和实时测试高温部件热疲劳失效的试验装置, 2010 (专利号:ZL 201020000159.0).
[12]周益春, 刘奇星, 毛卫国, 蒋俊平. 用于涡轮叶片热障涂层系统破坏过程的有限元建模方法[P]. 中国发明专利, 2009, (专利号:ZL200910085777.1).
[13]周益春, 刘奇星, 毛卫国. 多重热循环下涡轮叶片热障涂层危险区域的预测方法[P]. 中国发明专利, 2010, (专利号:ZL 201010034048.6).
[14]周益春, 刘奇星, 毛卫国. 涡轮叶片热障涂层应力的预测方法[P]. 中国发明专利, 2010, (专利号:ZL201010124850.4).
[15]周益春, 刘奇星, 毛卫国. 用于热循环条件下热障涂层系统有限元模拟的辅助软件[CP]. 中国计算机软件著作权, 2010, (著作权编号:2010SR018980).
[16]毛卫国, 万杰, 戴翠英, 丁佳, 多功能一体化维氏压痕仪分析软件, 中国计算机软件著作权(编号:2012R11S048409),2012.
应邀参加一系列高级别国际学术会议,并在大会上作了口头报告:
[1] 2015年在贵州省贵阳市举行的中国材料大会年会,并作口头报告。
[2] 2015年7月份在重庆召开第十四届全国实验力学学术会议,并作口头报告。
[3] 2015年8月份在上海举行的中国力学学会年会,并作口头报告。
[4] 2014年10月份参加在成都举行的全国固体力学大会,并作口头报告。
[5] 2014年10月份参加在海口举行的第二届先进材料国际青年学者大会(IUMRS-ICYRAM),并作分会场的邀请报告。
[6] 2014年11月份应邀参加在北京举行的“热障涂层”双清论坛会议。
[7] 2014年12月份应邀参加在湘潭举行的湖南省仪器仪表学会第六次会员代表大会暨2014年度学术年会,并被选为常务理事。
[8] 2014年7月份参加在合肥中国科技大学举行“实验力学高级讲习班——三维数字散斑相关技术及应用”。
[9] 2013年9月份应邀参加在中国山东举行的国际材料研究联合会(IUMS2013),并作分会场邀请报告。
[10] 2013年6月份应邀参加中国北京首次举办的第十三届国际断裂力学大会(ICF13),作口头报告和分会场主席主持学术讨论。
[11] 2013年8月份应邀参加在陕西举行的中国力学大会年会,并作2个分会场邀请报告。
[12] 2013年7月份应邀参加在北京举行的“多学科交融的功能材料发展前沿青年科学家论坛”,并作邀请报告。
[13] 2012年10月份参加在广西举行的2012全国无机薄膜与涂层学术研讨会暨2012全国无机粉体制备与表征学术研讨会,担任分会场主席,并作大会特邀报告。
[14] 2012年11月份参加西北工业大学和西安交通大学联合承办的第二届全国实验力学青年学者研讨会,担任会场主席,并作口头报告。
[15] 2012年7月份参加昆明理工大学承办的第十三届全国实验力学学术会议(2012CSEM),担任分会场主席,并作2个口头报告。
[16] 2011年8月份参加哈尔滨工业大学承办的2011年中国力学学会学术大会(CCTAM2011),担任分会场主席,并作分会场邀请报告。
[17] 2010年10月份参加在北京举行的全国第一届实验力学青年学者研讨会。
[18] 2010年11月份参加在西安举行的第十六届物理力学学术会议。
[19] 2010全国固体力学大会暨《固体力学学报》创刊三十周年庆祝会议。
[20] 2009年在中国郑州召开的中国力学学会年会,并参与主持“薄膜、涂层及界面力学”专题研讨会”。
[21] 2008年1月份在香港科技大学举办的第八届基础断裂力学国际会议(ICFVIII)。
[22] 2008年5月份在中国广州华南理工大学举行的中国材料学会年会。
[23] 2006年11月份在海南三亚举行的亚太地区断裂与强度国际会议(APCFS’06)。
[24] 2005年3月份在意大利都灵举行的第11届世界断裂力学会议(The 11th International Conference On Fracture)。
[25] 2004年在上海举行的中国科协第五届青年学术年会材料科学技术分会暨第三届海内外中华青年材料科学技术研讨会。
[26] 2004年在中国苏州举行的中国科协第二届优秀博士生学术年会,其论文被评为优秀论文。
[27] 2003年12月份在香港科技大学举行的国际材料宏观/介观/微观/纳观力学会议。
课题组相关介绍:导师网页:http://daoshi.xtu.edu.cn/index.php?id=1258
热诚欢迎力学、材料、物理、电子、机械、化学、土木等专业的莘莘学子加盟本课题组,共同进步!
脱产博士后:5万/年+奖励,在职博士后:1万/年+奖励,均负责解决住宿问题
博士生:2400元/月+奖励
硕士研究生:按照不同年级享受不同待遇。
附注:湘潭大学2016年硕士研究生招生说明http://yjsc.xtu.edu.cn/html/168/1260.html
Archiver|手机版|科学网 ( 京ICP备07017567号-12 )
GMT+8, 2024-9-27 10:27
Powered by ScienceNet.cn
Copyright © 2007- 中国科学报社