博文
一本断裂力学英文专著的出版发行
|
一本断裂力学英文专著的出版发行
岳中琦
2014年6月，高等教育出版社和德国De Gruyter出版社联合，分别在国内和海外出版发行了《层状和梯度材料断裂力学》英文专著（下图）。
这本专著的中文版书名是《梯度材料断裂力学的新型边界元法分析》。它在2011年9月由高等教育出版社出版，选为“十二五”中国国家重点图书之一。这本专著是肖洪天教授和我自2000年以来合作研究成果之一。具体发表论文情况请参见本文附件。
肖洪天教授在1998年获得了清华大学大学水利水电工程系博士学位，精通经典边界单元方法。自2000年以来，我们展开了合作研究，把经典的均匀材料边界单元方法推广到了层状和梯度材料断裂力学分析和预测研究。基本原理就是用层状材料中的广义Kelvin基本解替换了经典边界单元方法中的均匀材料的Kelvin基本解。而这个广义Kelvin基本解就是后来人们称为的Yue’s解。详细情况可参见博文“三十年磨一冠名解” http://blog.sciencenet.cn/blog-240687-840328.html和“三十年磨一冠名解（续）” http://blog.sciencenet.cn/blog-240687-925217.html。
肖洪天教授一直在山东科技大学土木工程与建筑学院从是教学和科研工作。在上周（6月29日和30日），我们一道在济南参加了山东科技大学召开的“矿山灾害预防控制省部共建国家重点实验室”申报论证会http://www.sdust.edu.cn/content__B140044315ECFF05A45505F9398ABB67.htm。肖洪天教授表示一定要再深入研究下去，发表更高水平科技论著，更好地服务矿山灾害预防控制工作。我为之感动！
我感到，在科技研究的方向合理、问题实用和方法突破的基础上，长期合作研究与发展，必然成果累累。我们由衷地感谢香港大学、香港特区政府研资局、国家自然科学基金和山东省泰山学者的经费资助。
2018年7月5日11：00写成于港大602办公室
附件：与肖洪天教授合作研究成果列表
一本专著（中文、英文）
肖洪天，岳中琦，2011. 梯度材料断裂力学的新型边界元分析，高等教育出版社，北京，页数278, ISBN 978-7-04-032214-9, p.278.
Xiao HT, Yue ZQ, 2014. Fracture Mechanics in Layered and Graded Solids: Analysis Using Boundary Element Methods, De Gruyter & Higher Education Press, Berlin, Germany, ISBN 978-3-11-029787-4, p.305.
15篇SCI英文论文
Yue ZQ, Xiao HT, 2002. Generalized Kelvin solution based boundary element method for crack problems in multilayered solids, Engineering Analysis with Boundary Elements, 26(8): 691-705.
Yue ZQ, Xiao HT, Tham LG, 2003. Boundary element analysis of crack problems in functionally graded materials, International Journal of Solids and Structures, 40(13-14): 3273-3291.
Yue ZQ, Xiao HT, Tham LG, 2004. Elliptical crack normal to functionally graded interface of bonded solids, Theoretical and Applied Fracture Mechanics. 42(3): 227-248.
Yue ZQ, Xiao HT, Tham LG, Lee CF, Yin JH, 2005, Stresses and displacements of a transversely isotropic elastic halfspace due to rectangular loadings, Engineering Analysis with Boundary Elements, 29(6): 647-671.
Xiao HT, Yue ZQ, Tham LG, Lee CF, 2005. Analysis of elliptical cracks perpendicular to the interface of two joined transversely isotropic solids, International Journal of Fracture, 133(4): 329 – 354.
Xiao HT, Yue ZQ, and Tham LG, 2005. Analysis of an elliptical crack parallel to graded interfacial zone of bonded bi-materials, Mechanics of Materials, 37(7): 785-799.
Yue ZQ, Xiao HT, Tham LG, Lee CF, Pan E, 2005. Boundary element analysis of three-dimensional crack problems in two joined transversely isotropic solids, Computational Mechanics, 36(6): 459-474.
Yue ZQ, Xiao HT, and E Pan, 2007. Stress intensity factors of square crack inclined to interface of transversely isotropic bi-material, Engineering Analysis with Boundary Elements, 31(1): 50-65
Xiao HT, Yue ZQ, Tham LG, Chen YR, 2005. Stress intensity factors for penny-shaped cracks perpendicular to graded interfacial zone of bonded bi-materials, Engineering Fracture Mechanics. 72(1): 121-143.
Xiao HT, Yue ZQ. 2009. A generalized Kelvin solution based BEM for contact problems of elastic indenter on functionally graded materials, CMES-Computer Modeling in Engineering & Sciences, 52(2): 159-179.
Xiao HT, Yue ZQ. 2011. A three-dimensional displacement discontinuity method for crack problems in layered rocks, International Journal of Rock Mechanics and Mining Sciences 48(3) 412–420.
Xiao HT, Yue ZQ, 2012. Stresses and displacements in functionally graded materials of semi-infinite extent induced by rectangular loadings, Materials, 5(2), 210-226
Xiao HT, Yue ZQ, Zhao XM, 2012. A generalized Kelvin solution based method for analyzing elastic fields in heterogeneous rocks due to reservoir water impoundment, Computers & Geosciences, 43: 126-136.
Xiao HT, Yue ZQ, 2013. Elastic fields in two joined transversely isotropic media of infinite extent as a result of rectangular loading, International Journal for Numerical & Analytical Methods in Geomechanics, 37(3): 247-277.
Xiao HT, Xie YY, Yue ZQ, 2015. Analysis of square-shaped crack in layered halfspace subject to uniform loading over rectangular surface area, CMES-Computer Modeling in Engineering & Sciences, 109-110(1): 55-80.
13篇中文学报论文
Xiao HT, Yue ZQ, 2003. Boundary element analysis of 3D crack problems in layered materials, Chinese Journal of Computational Mechanics, 20(6): 721-724 (in Chinese).
Xiao HT, Yue ZQ, 2005. Growth of penny-shaped crack parallel to graded interface of bimaterials under inclined tension, Acta Mechanica Solid Sinica. Vol. 26(1): 22-28(in Chinese).
Xiao HT, Yue ZQ, YR Chen, 2005. Growth of penny-shaped crack perpendicular tograded interface of bimaterials under inclined tension and compression. Engineering Mechanics, 22(6): 41-45(in Chinese).
Xiao HT, Yue ZQ, 2008. Dual boundary element analysis of rectangular-shaped cracks in graded materials, Chinese Journal of Theoretical and Applied Mechanics. 40(6): 840-848(in Chinese).
Xiao HT, Q Yue, Yue ZQ, 2009. Analysis of axially loaded single piles and pile groups in non-homogeneous foundations, Engineering Mechanics, 26(2), pp.163-167(in Chinese).
Wang BJ, Xiao HT, and Yue ZQ, 2012. The interaction of two coplanar cracks in a transversely isotropic half-space, Chinese Journal of Computational Mechanics, 29(4): 494-504(in Chinese).
Wang BJ, Xiao HT, and Yue ZQ, 2012. Interaction between two rectangular cracks in a transversely isotropic medium of semi-infinite extent, Rock and Soil Mechanics, 33(8): 2527-2535(in Chinese).
Wang BJ, Xiao HT, Sun LZ and Yue ZQ, 2012. A rectangular crack in transversely isotropic half space subjected to normal or tangential tractions, Journal of Shandong University of Science and Technology (Natural Science), 31(6): 20-29(in Chinese).
Xiao HT, Wang BJ, and Yue ZQ, 2012. Analysis of rectangular cracks subjected to non-uniform loads in layered rocks, Engineering Mechanics, 29(12): 108-113(in Chinese).
Wang BJ, Xiao HT, Sun LZ and Yue ZQ, 2014. Effect of the anisotropy of the layered rock mass on the fracture behaviours of its embedded cracks, Chinese Journal of Underground Space and Engineering, 10(S2), 1755-1761(in Chinese).
Xiao HT, Yue ZQ and Sun LZ, 2014. New boundary element method for analysis of surface subsidence due to coal mining, Journal of Engineering Geology, 22(2), 319-325(in Chinese).
Wang B.J., Xiao H.T., Sun L.Z. and Yue Z.Q. 2015. A boundary element method for kinked crack in transversely isotropic rock material of infinite domain, Rock and Soil Mechanics, 36(3), 885-890(in Chinese).
Sun LZ, Xie YY, Xiao HT, Yue ZQ, 2017. Analysis of crack in layered media of halfspace extent under surface tractions, Chinese Journal of Applied Mechanics, 35(5): 862-868(in Chinese)
8篇英文会议论文或摘要
Yue ZQ, Xiao HT, 2003. A new boundary element method for crack mechanics in functionally graded materials. Proceedings of the 7th (2002-2003) Annual Meeting of Hong Kong Society of Theoretical and Applied Mechanics, Hong Kong, China, March 8, 2003. pp. 5.
Yue ZQ, Xiao HT, 2004. Boundary element method for prediction of penny-shaped crack growth in functionally graded materials, Proceedings of the 2004 Conference of International Association for Boundary Element Methods, www.iabem2004.org, Minneapolis, Minnesota, USA, Session 3.4 – Functionally Graded Materials, paper 3: pp.1-3.
Yue ZQ, Xiao HT, Tham LG, 2004. A new boundary element method for crack growth in FGMs, Proceedings of the 6th World Congress on Computational Mechanics (WCCMVI-APCOM’04), September 5 to 10, 2004, Beijing, China. Tsinghua University Press & Springer-Verlag. p8.
Yue ZQ, Xiao HT, Tham LG, Lee CF, 2005. Dual boundary element analysis of crack growth in functionally graded materials, The 2005 Joint ASCE/ASME/SES Conference on Mechanics and Materials (McMat2005) Proceedings, Baton Rouge, Louisiana, June 1 - 3, 2005, Edited by: George Z. Voyiadjis & Robert J. Dorgan, p.32.
Yue ZQ, Xiao HT, 2005. Boundary element methods for heterogeneous rocks and rock masses and application to fracture mechanics. Proceedings of Abstracts of the Chinese Congress of Theoretical and Applied Mechanics, Beijing, August 26-28, 2005. Vol. 1, pp. 369.
Xiao HT, Yue ZQ, Yu LQ, Feng JP, 2012. New boundary element method for analysis of surface subsidence due to coal mining, Proceedings of 2012 Forum on Urban Geoenvironment and Sustainable Development, 3‐7 December 2012, Hong Kong, pp. 114
Yue ZQ, Xiao HT, 2013. Development of classical boundary element analysis of fracture mechanics in gradient materials, Paper No. M09-001 of Session M09, Proceedings, 13th International Conference on Fracture, June 16-21, 2013, Beijing.
Xiao HT, Sun LZ, Yue ZQ, 2015. The three-dimensional analysis of the influence of mining coal seams on the floor strata, Computer Methods and Recent Advances in Geomechanics, Edited by Oka, F; Murakami, A; Uzuoka, R; Kimoto, S, Pages: 1931-1935, Proceedings Paper, Conference of Computer Methods and Recent Advances in Geomechanics, Kyoto, Japan, September 22-25, 2014.
Xiao HT and Yue ZQ. 2016. Analysis of crack problems in graded halfspace subject to complex loading, Proceedings of International Geotechnics Symposium cum International Meeting of CSRME 14th Biennial National Congress, Editors Feng XT and Yue ZQ, 14-17 December 2016, Hong Kong, China, ISBN: 978-988-99537-7-5; Published by Advanced Technology Limited. pp. 48-49.
https://blog.sciencenet.cn/blog-240687-1122365.html
上一篇：创新研究偶然发现与科学发现的一等奖案例
下一篇：Work Order 和Time Sheet
