博文
- [C-2010] A NOVEL SENSOR USING TOOL COATING AND ITS SUBSTRATE
- Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA,MSEC2010-34027 A NOVEL SENSOR USING TOOL COATING AND ITS SUBSTRATE AS THERMOCOUPLE TO MEASURE CUTTING TEMPERATURES Zhang Shijun and Liu Zhanqi ...
- [C-2011]Numerical Modeling of Minimum Uncut Chip
- ASME 2011 International Manufacturing Science and Engineering Conference, Volume 2 ISBN: 978-0-7918-4431-1,MSEC2011-50285 pp. 403-407, doi:10.1115/MSEC2011-50285 Numerical Modeling of Minimum Uncut Chip Thickness for Micromachining With Different Rake A ...
- [J-2012]Effect of Cutting Speed on Surface Integrity in High
- Materials Science Forum Vols. 697-698 (2012) pp 208-212 Effect of Cutting Speed on Surface Integrity in High Speed Machining Nickel-Based Superalloy Inconel 718 Z.Q. Liu, C.M. Cao,J. Du and Z.Y. Shi Abstract. Surface integrity is becoming important to satisfy the ...
- [J-2011] J-C本构参数对绝热剪切影响的敏感性分析
- 刘战强，张克国， J-C 本构参数对绝热剪切影响的敏感性分析，航空学报， 2011，32（11）：2140-2146 摘 要 ： 综合考虑应变、应变率和温度对绝热剪切的影响，通过理论推导建立了基于 J-C 本构方程的绝热剪切失稳判据。以 45 钢、 TC4 钛合金和 7050 航空铝合金三种不同的金属 ...
- [J-2011]高速面铣刀气动噪声计算与分析
- 吉春辉 , 刘战强 *, 刘鲁宁高速面铣刀气动噪声计算与分析，中国科学 技术科学 2011,41: 63-68 摘要 面铣削过程中的噪声大致上可以分为空转噪声和切削噪声, 空转噪声主要由铣刀气动噪声组成. 基于 Ffowcs Williams-Hawkings ...
- [J-2011]面铣刀气动噪声数值模拟及不等齿距面铣刀的降噪方法
- 吉春辉 , 刘战强 * ，面铣刀气动噪声数值模拟及不等齿距面铣刀的降噪方法，科学通报 2011,56: 1940-1946 摘要 高速面铣刀气动噪声由离散噪声与对总噪声影响较大的宽带噪声组成. 针对高速面铣刀流场和声场的非定常特点, 采用计算流体动力学(computational f ...
- [J-2011]高速面铣刀气动噪声及其频谱分析
- 刘战强，吉春辉，刘鲁宁，艾兴，高速面铣刀气动噪声及其频谱分析，机械工程学报， 2011 ， 47 （ 11 ）： 163-168 摘要： 高速面铣削过程中的噪声严重影响工作人员的健康， 偶极子声源是气动噪声的主要声源， 基于Ffowcs Williams-Hawkings(FW-H)方程建立高速面铣刀气动噪声预测模型，采用计算流 ...
- [J-2010]An Experimental and Numerical Analyses of Hard Turn
- Z. Q. Liu* and P. F. Zhao. An Experimental and Numerical Analyses of Hard Turning AISI 440C Martensitic Steel . MATERIALS PROCESSING SCIENCE AND TECHNOLOGY-An International Journal, 2010,1(1): 1-11 Hardened AISI 440C martensitic stainless steel with high chromium and carbon elements is ...
- [J-2011] Influence of cutting speed on surface integrity for
- Int J Adv Manuf Technol (2011) 56:553–559 DOI 10.1007/s00170-011-3196-7 ORIGINAL ARTICLE Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH95 Du Jin Zhanqiang Liu*Wan Yi Guosheng Su Powder meta ...
- [J2010-8] An experimental study on influences of material
- Int J Adv Manuf Technol (2010) 51:8792 DOI 10.1007/s00170-010-2619-1 An experimental study on influences of material brittleness on chip morphology Guosheng Su Zhanqiang Liu Abstract Though several material properties such as hardness, thermal conductivity, specific heat, ...
