博文
- [J-2013] Size effect on surface roughness
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 14, No. 3, pp. 345-349 MARCH 2013 DOI: 10.1007/s12541-013-0048-4 Size Effect on Surface Roughness in Micro Turning Tao Zhang, Zhan-qiang Liu*, Zhen-yu Shi, and Chong-hai Xu The conventional model predicts tha ...
- [J-2013] Development of a thermocouple sensor using tool
- Zhanqiang, L. and Shijun, Z. (2013) ‘Development of a thermocouple sensor using tool coating and its substrate to measure metal turning temperatures’, Int. J. Materials and Product Technology, Vol. 46, No. 1, pp.71–80. Development of a thermocouple sensor using tool coating and its substr ...
- [J-2013]Analytical and experimental study on formation of
- Int J Adv Manuf Technol (2013) 65:1735 – 1740 DOI 10.1007/s00170-012-4295-9 Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-speed machining Guosheng Su Zhanqiang Liu Abstract: Saw tooth chip is ...
- [J-2012] 高速切削中切削速度对工件材料力学性能和切屑形态
- 高速切削中切削速度对工件材料力学性能和切屑形态的影响机理 苏国胜, 刘战强*, 万熠, 艾兴 摘要 首先根据不同应变率阶段金属材料的塑性变形机制, 分析工件材料强度和塑脆性随切削速度提高的变化规律, 通过理论计算说明这种变化对切屑锯齿化的作用机制, 揭示不同切削速度下产生不同形态切屑的控制机理; 然后, 在40-700 ...
- [J-2012] Wear characteristics of nano TiAlN-coated carbide
- Wear characteristics of nano TiAlN-coated carbide tools in ultra-high speed machining of AerMet100 Guosheng Su, Zhanqiang Liu In this paper cutting experiments of AerMet100 (52 HRC) using nano TiAlN-coated carbide tools with cutting speed from 250m/min to 7000m/min are carried out. Th ...
- [J-2012] Characteristics of chip evolution with elevating cu
- Characteristics of chip evolution with elevating cutting speed from low to very high Liu Zhanqiang*, Su Guosheng To validate the correlation between chip morphology and material dynamic mechanical properties, a wide-range cutting speed (from 30 m/min to 7000 m/min) experiment is conducted ...
- [J-2012] Effect of cutting speed on surface integrity
- Effect of cutting speed on surface integrity and chip morphology in high-speed machining of PM nickel-based superalloy FGH95 Du Jin Zhanqiang Liu* High-speed machining is being recognized as one of the key manufacturing technologies for getting higher productivity and better surface ...
- [J-2012]Numerical Analysis of Aeroacoustic Noise for High-
- Numerical Analysis of Aeroacoustic Noise for High-Speed Face Milling Cutters in Three Dimensional Unsteady Flow Fields Ji chunhui Liu Zhanqiang* Aeroacoustic noise produced by high speed face milling cutters is a serious environmental concern. This paper develops a modeling approach ...
- [C-2011]-AN ASSESSMENT, DEFINITION, AND DETERMINATION OF THE
- Proceedings of the ASME 2011 International Mechanical Engineering Congress Exposition IMECE2011 November 11-17, 2011, Denver, Colorado, USA,IMECE2011-63781 AN ASSESSMENT, DEFINITION, AND DETERMINATION OF THE MINIMUM UNCUT CHIP THICKNESS OF MICROCUTTING AND IMPACT ON MACHINING NEW POWD ...
- [C-2010] PREDICTING THE EFFECT OF VIBRATION ON MACHINING
- Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference MSEC2010, October 12-15, 2010, Erie, Pennsylvania, USA,MSEC2010-34091 PREDICTING THE EFFECT OF VIBRATION ON MACHINING DISTORTION IN HIGH-SPEED MILLING AEROSPACE MONOLITHIC COMPONENTS ...
